Question about 2011 KTM 250 SXF

2011 KTM 250 SXF front wheel torque specs

Ktm 250 sxf 2011 what are front wheel torque settings @

1 Related Answer

TerryTown

292 Answers

SOURCE: i need engine torque settings on my 2008 ktm sxf

Thank you for contacting FixYa with your inquiry. I have been going
over some of the older help requests that have been archieved and
trying to provide solutions for those that didn't get answered. Hope
this information helps.

Try these:

KTM Torque settings

Collar screw, front wheel spindle Front axle nut 40Nm 30ft lbs
Brake Caliper front Brake Caliper front Loctite 243 2 19ft lbs
Brake Disk, front Brake disk front Loctite 243 1 11ft lbs
Brake Disk, rear Brake disk rear Loctite 243 1 11ft lbs
Clamping screws, upper fork bridge Top triple clamp 20Nm 15ft lbs
Clamping screws, lower fork bridge Bottom triple clamp 15Nm 11ft lbs
Clamping screws, fork stubs Front axle pinch bolts 10Nm 7ft lbs
Collar nut, rear wheel spindle Rear axle nut 80Nm 59ft lbs
Hex nut swingarm bolt Swingarm nut 100Nm 74ft lbs
Hex collar screw handlebar clamp Upper handlebar clamps 20Nm 15ft lbs
Allen head screw handlebar support Lower handlebar clamps Loctite 243 4 30ft lbs
Shock absorber top Shock absorber top bolt 60Nm 44ft lbs
Shock absorber bottom Shock absorber bottom bolt 60Nm 44ft lbs
Sprocket screws Rear sprocket bolts Loctite 243 3 25ft lbs
Ball joint for push rod Rear brake pedal pivot Loctite 243 1 7ft lbs
Engine mounting bolts Engine mounting bolts 45Nm 33ft lbs
Engine brace Engine brace 33Nm 24ft lbs
Screw adjusting ring spring preload Shock preload collar bolt 8Nm 6ft lbs
Spoke nipple Spokes 5Nm 4ft lbs
Other Screws on chassis M6 10Nm 7ft lbs
M8 25Nm 19ft lbs
M10 45Nm 33ft lbs
Other collar nuts on chassis M6 15Nm 11ft lbs
M8 30Nm 22ft lbs
M10 50Nm 37ft lbs
Front Sprocket 44ft lbs

Posted on Oct 29, 2011

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0 Answers

2011 ktm250 sxf wont start

i have a 2009 ktm 450 sxf and was riding yesterday and it stalled out when i switched to fourth gear and wont start back. battery is good and when i hit the e start it just clicks once, and it wont roll start either. any suggestions? could it be the switch under the tank? PLEASE HELP!

Sep 24, 2012 | 2008 KTM 250 SX-F

1 Answer

2011 KTM 250 SXF valve clearance

.010" inlet hot .012" exhaust hot if water cooled
if air cooled add .002" to the measurements

Nov 01, 2017 | 2011 KTM 250 SXF

1 Answer

2011 250 sxf . owned for 8 months bought new.problem is the bike will die as soon as you give it gas.problem is very intermitent. may run great for a while then will start doing it again. been to dealer 6...

When you "give it gas" you are opening the throttle.
At that point the fuel system is supposed to supply the engine with more fuel to maintain the air/fuel mixture.
Check for anything that might be clogged like filters, hoses, fuel passages, etc.
If it is still under warranty you could void your warranty
if you work on it though in this case a warranty is meaningless if you have taken it in 6 times.
I've seen models where you could replace everything and
a week later it would refuse to run.
Sometimes it's better to leave the thing at the junk yard and buy a new one but that doesn't happen often.

Nov 02, 2017 | 2011 KTM 250 SXF

1 Answer

Where can i get a 2011 ktm 250sxf workshop manual

try ebay.com

Jul 04, 2011 | 2011 KTM 250 SXF

1 Answer

What Spark Plug Tool Will Remove My Plug From My KTM 250 SXF 2008? Spark Plug Wrench 16mm 1/2 Inch 60029073000 Spark Plug Key 77029072000 Didnt Get One With My Bike And Want To Order The Right One....

Motion Pro offers a tool that is half the price of the one KTM offers, that will do the job. I got mine at Bikebandit.com after searching all over for months trying to find a cheap alternative to removing the spark plug from my 2007 KTM 250 SXF.

Aug 07, 2010 | 2005 KTM EXC 450 Racing

1 Answer

I need engine torque settings on my 2008 ktm sxf 250 motorcross bike

KTM Torque settings

Collar screw, front wheel spindle Front axle nut 40Nm 30ft lbs
Brake Caliper front Brake Caliper front Loctite 243 2 19ft lbs
Brake Disk, front Brake disk front Loctite 243 1 11ft lbs
Brake Disk, rear Brake disk rear Loctite 243 1 11ft lbs
Clamping screws, upper fork bridge Top triple clamp 20Nm 15ft lbs
Clamping screws, lower fork bridge Bottom triple clamp 15Nm 11ft lbs
Clamping screws, fork stubs Front axle pinch bolts 10Nm 7ft lbs
Collar nut, rear wheel spindle Rear axle nut 80Nm 59ft lbs
Hex nut swingarm bolt Swingarm nut 100Nm 74ft lbs
Hex collar screw handlebar clamp Upper handlebar clamps 20Nm 15ft lbs
Allen head screw handlebar support Lower handlebar clamps Loctite 243 4 30ft lbs
Shock absorber top Shock absorber top bolt 60Nm 44ft lbs
Shock absorber bottom Shock absorber bottom bolt 60Nm 44ft lbs
Sprocket screws Rear sprocket bolts Loctite 243 3 25ft lbs
Ball joint for push rod Rear brake pedal pivot Loctite 243 1 7ft lbs
Engine mounting bolts Engine mounting bolts 45Nm 33ft lbs
Engine brace Engine brace 33Nm 24ft lbs
Screw adjusting ring spring preload Shock preload collar bolt 8Nm 6ft lbs
Spoke nipple Spokes 5Nm 4ft lbs
Other Screws on chassis M6 10Nm 7ft lbs
M8 25Nm 19ft lbs
M10 45Nm 33ft lbs
Other collar nuts on chassis M6 15Nm 11ft lbs
M8 30Nm 22ft lbs
M10 50Nm 37ft lbs
Front Sprocket 44ft lbs

Oct 29, 2009 | 2008 KTM 250 SX-F

1 Answer

Head bolt torque

Hi bengriffith1
You can download a copy of the engine manual from here
It has all the info you need. Any problems with the download just let me know
regards robotek

Apr 02, 2009 | 2006 KTM 250 SX-F