Question about 2009 Suzuki Boulevard C90T
Remove the rear wheel on Suzuki Boulevard c90t with disk brakes @
If you have an air compressor and air gun tip simply
insert the tip into the grip and apply air but
you need to remove the vibration dampeners first
Posted on Mar 27, 2009
hi buddy dust wouldnt cause this problem change the disc and get a softer pad its difficult to understand why this happens but basically metal in the pads cause groves in the disc and the metal in the pads try slotting in these grooves as you brake and this causes squeaking mate
Posted on Sep 19, 2009
Loosen the castle nut on the right side of the bike and push the axel bolt threw the other side. Remove the spacer that is on the right side. pull the wheel to the right and it should come off.
Posted on Sep 29, 2009
remove the two 4mm alen head bolts form the side, theses have lock tight so uses a small hammer to tap while you put preasure on them. a trusted buddy to tap with the hammer. then remove the two forward covers to be able to remove the forward two. and lift the seat from the rear.
Posted on Apr 13, 2010
the altanator is under the left side cover that bulges out, to test the out put with a meter find the plug with the 3 yellow wires that comes from that cover and test with meter set on ac volts 0 to 100 range. put the leads between the wires with them unplugged from harness, test all combantions and you should get about 60 ac volts when you rev motor to 3500 rpm. if this checks good you need the rectifier/regulator not the stator.
Posted on Sep 11, 2010
Tips for a great answer:
Aug 25, 2015 | 2009 Suzuki Boulevard C90T
Apr 15, 2014 | 2006 Suzuki Boulevard C90T
Nov 22, 2010 | 2005 Suzuki Boulevard C90T
Sep 27, 2009 | 2007 Suzuki Boulevard
451 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: