See if the govenor is stuck in the on position. This could be attached to your parking break. That would be one possiblity for this to happen.
If you need further help, I’m available over the phone at https://www.6ya.com/expert/daniel_a4640839dbb7ec58
Testimonial: "hey dan much thanks to you buddy"
SOURCE: What is a fault code ct 28 on gsxr 600
c28 is the code for a problem with the secondary throttle valve actuator
hope this helps
regards bert31000
SOURCE: bike runs in neutral but cuts out when a gear is selected.
Your sidestand switch kills the engine if the bike is put in gear with the sidestand down. If your stand is up and this is happening either the switch is broken or out of position. If it is broken you can twist the wires together until you can replace the switch. If it is just bent out of position you can bend it back carefully.
SOURCE: suzuki gsxr 600 06 starting problems
200° is quite warm...
If the engine wont turn over, probabily you have a bad battery, a bad starter or a bad starter relay, or bad connections.
A hot engine has more compression. If the full battery power doesn't reach the starter it won't turn over...
SOURCE: Loss of power accelerating after the bikes warms up GSXR 600 K7
I think he meant to loosen the clutch cable so you have a small amount of free play before the clutch operates.
Testimonial: "Cheers! Yeah they did adjust the lever but it made no difference."
416 views
Usually answered in minutes!
×