Question about 2003 kawasaki KX 125
Fork oil amount for 03 kx65 @
Hi, Chris for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
KX 65 FORK OIL WHAT TYPE how to meassure level
Kawasaki KX65 Service Manual
OEM Parts for Kawasaki
Kawasaki KX65 Owner Manual
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Mar 21, 2018
SOURCE: Fork Oil Capacity
Use Yamaha suspension oil #01. Amount is 19 ounces. Oil level from top surface w/o cap nut is 3.15" to 5.51". I am sending you a link to a site where you can download a free shop repair manual. It is actually a bit complicated as you will see in the manual.
Top rating due on this one! Thanks!
Posted on Apr 24, 2009
The owners manual says to do the following if you don't want to remove the forks:
*raise the front wheel
*remove the fender, meter cable & unit, headlight, handle bar, fork protectors
*loosen the fork upper clamp bolts
*remove the caps from the top of the fork tube
*fully compress the fork tube so the dust cover touches the bottom and place a stand to hold it
*remove the springs
*set the oil level 68mm (standard) or 60 - 90 mm (adjustable) from the top of the tube
It may be easier to remove the tubes and you could replace the leaky seal at the same time. I did this recently and put in new springs too. It was my first time working on forks. With help from TT members and the service manual it was fairly easy. I didn't buy an oil gauge, seal driver, or spring holder. I used a ruler to measure the oil and a medicine dropper to remove any excess. For a seal driver I used a piece of PVC pipe cut in half then secured around the lower tube to drive the seal. Try a search on replacing fork seals for more info. 5w oil is standard but i have heard that 7 works well Good luck.
Posted on Dec 20, 2009
SOURCE: amount of oil in forks
The forks have to be bled correctly, then oil filled to the correct level by oil level (height) measurement. You need the service manual for your model if you are not familiar with the procedure. Since you asked the "amount" instead of "level" in millimeters - I assume you need the manual.
Posted on Feb 16, 2010
Tips for a great answer:
Dec 11, 2014 | 2014 Honda CRF 125F
Apr 27, 2014 | 2010 kawasaki KX 65
Apr 14, 2014 | 2004 Harley Davidson FLHTCUI Electra Glide...
Apr 07, 2014 | 2007 kawasaki KX65
Jun 01, 2012 | 2005 kawasaki KX 65
Feb 08, 2012 | 2003 kawasaki KLX 125
Jan 14, 2012 | 2009 kawasaki KX65
Jan 05, 2011 | 2004 Harley Davidson FXSTB - FXSTBI Night...
May 11, 2009 | 2003 Suzuki SV 1000 S
Apr 24, 2009 | 2003 Yamaha YZ 250 F
May 26, 2020 | Motorcycles
397 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: