- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi im guessing your year to be 1981 or 1982.First if you have not done so make sure your coil is grounded.Next disconnect your kill switch.Next check the primary side of the coil .3 to .5 ohms check the secondary side of the coil 5k to 7k ohms with out the spark plug cap.While your at it check for spark with out the cap.Make sure your kicking it fast as motoplats do not spark below 700 rpm.If all else fails you have a few choices .Vance smith can rebuild yours for under 200.00 usally.You can go with a pvl ignition for around 500.00.Also make sure your crank bearings are tight and your mag side crank seal is not leaking if you smell fuel in the mag cover you need to replace your crank seal good luck