Kymco agility 50cc ,new stator,carb,coil,,cdi,.new top end kit. Started ran grate 1week.now crank it fast. Wants to start but won't

SOURCE: suzuki gn125 wont start. checked carb, cdi, coil.

Check the valve adjustment. If a valve is standing open just a little, the compression will be too low to start the engine. Check fuel delivery by dribbling a little gasoline into the carb and try starting the bike. If it starts and runs for a second or two, you're not getting fuel into the cylinders. Check you carb again.

SOURCE: Polaris 1999 Sportsman 500. Had no fire. Replaced

this sounds crazy but is your speedometer in working order. i have a 99 also and i didnt get any spark one day just quit. after a couple days of trying things i read on the internet about if your speedometer is not working and cutting on or off it will short out the spark and also make the 4 wheel drive not work. i unhooked the speedo and no problems since.

SOURCE: 1997 Yamaha Kodiak 400, hard to start, once you

I would follow the fuel line all the way check the filter it should be inline and check the pump as well i would say its one of them two.

SOURCE: my 2005 50cc kymco cobra racer scooter does not start

i have fire and new cdi ran find for 2 days but hard to start now it will not start

maurice44o4

• 74 Answers
• Posted on Jan 27, 2012

SOURCE: I have a kymco agility 50 and it won't start. It has no power what so ever, the starter won't turn over and the break light won't light when I pull the break. I checked the kill switch.

Check with a multi tester for voltage coming through the ignition switch lead wires + to switch wire - to ground you shoul get 12volt or higher, with the switch off you should have one live (feed from battery ), on you should have 2 or 3 in and out feed (possibly 2 out one for ignition one for light curuit), or disconnect the switch and check for continuity (12v battery wire and a bulb if you dont have a multi tester between each pin on the switch plug when turned on you should get a curcuit when on.