Question about 1996 kawasaki VN 1500 Vulcan Classic

1 Answer

1996 Kawasaki VN 1500 Vulcan Classic how to bleed the clutch

Where is the slave cylinder located at to bleed it on a 1996 Kawasaki 1500 classic @

Posted by eloy cardenas on

Ad

1 Answer

Gregg Mahin

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • kawasaki Master
  • 61,901 Answers

Hi, Eloy for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
hydraulic clutch bleeding
How to bleed hydraulic clutch on motorcycle in an extreme case of air...
Kawasaki VN1500 Service Manual
OEM Parts for Kawasaki
1996 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Feb 18, 2018

Ad

5 Related Answers

Jonathan Dawson

  • 50 Answers

SOURCE: clutch problem,where is the slave cylinder located

The clutch slave cylinder is located on the left side of the transmission, but i believe that the slave cylinder may come with the master cylinder and lines already attached

I’m happy to assist further over the phone at https://www.6ya.com/expert/jonathan_3a3c556b4b17d1d2

Posted on Aug 20, 2008

Ad
johnthejag

John Quinn

  • 286 Answers

SOURCE: bleeding the slave cylinder

Hi

Best to get the help of a friend to pump the clutch pedal for you.

Take care with the brake fluid, as it removes paintwork !

Top up your clutch fluid reservoir, connect a bleeding tube to the nipple on your slave cylinder, and put the other end of tube in a container.

Get your friend to pump pedal 3 times, and then hold to the floor.

Open the nipple for 5 seconds or so, then close.

Repeat this about 6 to 8 times topping up the fluid as you go.

You should then find, that the air is out of your system, and your pedal is back to normal !

Good luck !

A FixYa rating would be nice.... Thank you ! John.



Posted on Feb 10, 2009

Anonymous

  • 2 Answers

SOURCE: need to know how to bleed it

There would be a bleed nipple on it. It would be located near the bellhousing.
Open nipple a little let fluod seep out until no bubbles in it. Make sure you top the fluid up and dont let it empty.

Posted on May 04, 2009

Anonymous

  • 1 Answer

SOURCE: 95 mazda b4000 slave cylinder bleeder valve location

the nipple sticks out side the bell housing on the left side just above your hydralic line for your clutch,auto zones web has a complete diagraham and steps for bleeding

Posted on May 09, 2009

Keith100881

Dennis Saunders

  • 74 Answers

SOURCE: put in new clutch and slave cylinder. no clutch pedal. how do you bleed the cylinder?

work it back and forth with your hand and you will get pedal after a while then bleed like you would brakes get help so one can pump and the other can bleed

Posted on May 24, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1996 Kawasaki VN 1500 Vulcan Classic replace the clutch


Hi, Clarence for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1500 clutch replacement
2003 Kawasaki Vulcan 1500 Clutch repair Upgrade
Kawasaki VN1500 Service Manual
OEM Parts for Kawasaki
1996 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Feb 05, 2015 | 1996 kawasaki VN 1500 Vulcan Classic

1 Answer

2002 Kawasaki VN 1500 Vulcan Classic will not engage


Hi, Anonymous and the usual suspects are:
1. Clutch cable adjusted too tight.
2. Pressure plate center screw adjusted too tight
3. A broken clutch rod.
4. Slave cylinder piston stuck.
5. Clutch plate missing from the clutch pack.
6. Clutch plates have worn past minimum specifications.
7. Clutch plates crystallized due to incompatible oil.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clutch not fully engaging Help Kawasaki Vulcan Forum Vulcan Forums
clutch will not engage
Kawasaki Vulcan 1500 Classic Fi Service Manual
OEM Parts for Kawasaki
2002 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 22, 2014 | 2002 kawasaki VN 1500 Vulcan Classic

1 Answer

1997 vulcan unable to pull in clutch lever


If the lever was fine as you bled it then the problem lies elsewhere, either the slave cylinder is stuck or the push rod mechanism in the clutch itself is assembled wrong.

May 05, 2014 | 1997 kawasaki VN 1500 Vulcan Classic

1 Answer

1996 Kawasaki VN 1500 Vulcan Classic how to bleed the clutch


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
hydraulic clutch bleeding
How to bleed hydraulic clutch on motorcycle in an extreme case of air...
Kawasaki VN1500 Service Manual
OEM Parts for Kawasaki
1996 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Jan 03, 2014 | 1996 kawasaki VN 1500 Vulcan Classic

1 Answer

1996 Kawasaki VN 800 A Vulcan clutch won't disengage


Hi, Anonymous and the usual suspects are:
1. Clutch not properly adjusted.
2. Clutch plates rusted together.
3. Hydraulic clutch needs bleeding.
4. Faulty clutch slave cylinder.
5. Faulty clutch ramp mechanism.
6. Broken clutch rod
7. Clutch pack loose on the main shaft.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clutch won disengage fully Kawasaki Vulcan Forum Vulcan Forums
http://www.kawasakimotorcycle.org/forum/kawasaki-cruisers/145913-clutch-wont-fully-disengage-vulcan-vn1500-classic.html
KAWASAKI VN800 Service Manual
OEM Parts for Kawasaki
Kawasaki VN800 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Feb 21, 2013 | 1996 kawasaki VN 800 A Vulcan

1 Answer

1989 Kawasaki Vulcan VN1500 how to bleed the clutch


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
hydraulic clutch bleeding Kawasaki Vulcan Forum Vulcan Forums How to bleed hydraulic clutch on motorcycle VULCAN 1500 as example
Kawasaki VN1500 Service Manual
OEM Parts for Kawasaki
1996 Kawasaki Vulcan 1500 Classic Owner Manual

Aug 06, 2012 | 1996 kawasaki VN 1500 Vulcan Classic

1 Answer

2002 Kawasaki VN 1500 Vulcan Classic clutch will not disengage


Hi, Anonymous and the usual suspects are:
1. Clutch not properly adjusted.
2. Clutch plates rusted together.
3. Hydraulic clutch needs bleeding.
4. Faulty clutch slave cylinder.
5. Faulty clutch ramp mechanism.
6. Broken clutch rod
7. Clutch pack loose on the main shaft.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Clutch won disengage fully Kawasaki Vulcan Forum Vulcan Forums
Clutch wont disengage Vulcan Bagger Forums
Kawasaki Vulcan 1500 Classic Fi Service Manual
OEM Parts for Kawasaki
2002 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 22, 2012 | 2002 kawasaki VN 1500 Vulcan Classic

1 Answer

1996 Kawasaki VN 1500 Vulcan Classic stator location


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
1996 Kawasaki VN 1500 Vulcan Classic stator location Google Search
Kawasaki Vulcan VN750 stator replacement without removing the engine
Kawasaki VN1500 Service Manual
OEM Parts for Kawasaki
1996 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


May 04, 2012 | 1996 kawasaki VN 1500 Vulcan Classic

1 Answer

1996 Kawasaki VN 1500 Vulcan Classic how to bleed the front brakes


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
brake bleeding blues Kawasaki Vulcan Forum Vulcan Forums How to bleed your front rear brake calipers on your motorbike motorcycle
Kawasaki VN1500 Service Manual
https://www.partsfish.com/page/oem-parts-for-yamaha
1996 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Feb 16, 2012 | 1996 kawasaki VN 1500 Vulcan Classic

1 Answer

1996 Kawasaki VN 1500 Vulcan Classic how to bleed the clutch


Hi, Jim17046 for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
hydraulic clutch bleeding
How to bleed hydraulic clutch on motorcycle in an extreme case of air...
http://serwer.robert.webd.pl:30/manual/Kawasaki_VN_1500_87'-99_Service_Manual_ENG.pdf
OEM Parts for Kawasaki
1996 Kawasaki Vulcan 1500 Classic Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Apr 23, 2011 | 1996 kawasaki VN 1500 Vulcan Classic

Not finding what you are looking for?
1996 kawasaki VN 1500 Vulcan Classic Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6354 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...