Question about 2010 Suzuki RMZ 450

Open Question

2010 Suzuki RMZ 450 hard to start

Hello, I have 2010 RMZ 450 the valves are in spec but this thing is just hard to start some days it starts on the 5th to tenth kick some days might not start for two days has anyone had this happen what can I check or do I need to get some electrical things tested? it has a lot of compression very aggravated thanks, Brett @

Posted by Brett Pradat on


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

My 2010 rmz 450 crackles and pops at low revs, and surging when cruising, also backfires when i shut of the throttle, i have fitted a wiseco fuel mangement unit and played around with it but no luck,

sounds like a few things, bad/fouled spark plug,old/clogged fuel filter/old air filter or bad fuel. When taking bikes out of storage bikes often suffer from this problem from old fuel sitting in bike gumming it up.

May 21, 2014 | 2010 Suzuki RMZ 450

1 Answer

How much oil does suzuki rmz 450 2010 fork hold

Apr 03, 2014 | 2010 Suzuki RMZ 450

1 Answer

Timing chain fault. do 2005 rmz 450 bend valves when timing chain jumps?

my 06 rmz 450 timing chain jumped and rode it once for bout 30min, nothin interally went went wrong just went like **** lol

Jan 06, 2011 | 2005 Suzuki RM-Z 450

2 Answers

Are there timing issues with the 2006 rmz 450? I replaced the valves, (bent from timing) cam timing chain, oil and oil filiter. When I try to start it it backfires but will start... Once it gets hot and...

have u tried turning the engine over slow for about three to four turns with the kick starter then kick it once or twice hard should start...dont give it any throttle...floods easy

Oct 09, 2010 | 2005 Suzuki RM-Z 450

1 Answer

I have just gotten a rmz 250 2005, i want to know how to set the carb, also, when it is wet, the bike doesnt start, is this an electrical problem, or a suzuki problem?

bad starting is down to damp in the electricks give every thing a good spray with WD40 that should sort out the problem as for the card its not to hard to adjust the settings but its limited to how far you can take it

Nov 13, 2009 | 2004 Honda CRF 450 R

1 Answer

Hi, what should be suzuki rmz 450(2005) valve clearance, Thanks

The valve clearance settings for the 2005 RMZ450 when the engine is cold are > Exhaust .006 to .009 > Intake .005 to .007, per the factory service manual.

Please rate this answer. Thanks!

Apr 08, 2009 | 2005 Suzuki RM-Z 450

Not finding what you are looking for?
2010 Suzuki RMZ 450 Logo

Related Topics:

649 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

85239 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6480 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides