Question about 2011 Harley Davidson FLHTCU Ultra Classic Electra Glide

Open Question

2011 Harley Davidson FLHTCU Ultra Classic Electra Glide front brake light not working

I have a 2011 Harley dresser the front brake light went out but still had back does the modular board need to be changed? @

Posted by JoAnn Wolf on


2 Related Answers


  • 69 Answers

SOURCE: How do I change the front and rear brakes on a

Not too hard - Undo the two bolts on the caliper and then seperate the caliper and pull the old ones out. Insert the new ones and put the bolts back in to hold the caliper back together and then install them back on the bike with the two retaining bolts. Use a bit of lock tight (Blue) on the threads. Warning do not let anyone apply pressure on the brakes while you have them off the bike or you will have a mess and/or a problem.

Posted on Jun 21, 2009


matt sams

  • 124 Answers

SOURCE: How do I change my front brake light switch on my 2009 Harley crossbones?

Front brake light switch is in your right handle control assembly. couple little allen wrenchs, small snap ring pliers and a small straight slot screw driver is all you need. Take the front brake lever off, take out screws and open housing, the throttle cable and return has two little clips, be careful not to lose them.. you will see the switch inside, looks like a little black button with a rubber boot over it. take the clip off and pop it out, might need to take the handle bars off to get to the wiring harness for the switch. pop it back in and reassemble....

Posted on Oct 25, 2012


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to lower my 2011 Harley Davidson FLHTCUI Electra Glide Ultra Classic

smaller rim diameter
special made shorter springs ( have to fit shorter shocky)
talk with bike modifiers for more ideas

Nov 21, 2017 | 2011 Harley Davidson FLHTCU Ultra Classic...

1 Answer

Brake light not working on 2009 harley classic

If it's not the bald is the wiring or fuse start wherever you had the easiest access

Apr 03, 2013 | 2009 Harley Davidson FLHTCU Ultra Classic...

1 Answer

2008 ultra classic, brake light stays on. replaced front brake switch and still stays on.

check to see if there is a pedal brake light switch for the rear brake if so check out that switch as well

May 23, 2012 | 2008 Harley Davidson FLHTCU Ultra Classic...

Not finding what you are looking for?
2011 Harley Davidson FLHTCU Ultra Classic Electra Glide Logo

Related Topics:


Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6651 Answers


Level 3 Expert

4376 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1189 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides