My Keeway 200cc superlight speedometer is showing red light beam this happened after I washed the motorcycle and also the brake light stopped working need help?@
Hi, be carefull red lights are always a sighn of trouble !!!
in your case please check the wiring connection at the oil pressure gauge (usualy in the front of crankcase ) As for the tail bake light, also check wiring connections at the brake pedal switch and front brake switch ( under brake lever) Also check bulb. It will bea good idea to spresd som wd40 all over the electrical connections . Hope this helps
SOURCE: l head light low beem not working
You probably have the low side of your bulb blown check the bulb if that dont fix it ck your conector.if your dimmer switch was bad it wouldnt work on eather side. I will try to get you a diagram for the fuse box. PHIL.
SOURCE: keeway superlight 125 adjusments
Pull the slide out of the carb then move the clip on the jet needle down one or two notches. This will richen the low range fuel mix. You can also get a rear sprocket with about 4 more teeth. This will get you off the line and out of the corners faster BUT it will also lower your top speed.
Please rate this solution. Thanks supergunner!
SOURCE: 2 broken side panels for keeway superlight 125
This is something you should contact a Keeway dealer for....good luck...Tim
SOURCE: i need service manual for machine for my keeway
Here it is:
Look for manuals.
http://keewaysuperlight.blogspot.com/
SOURCE: were I can download keeway
this a the keeway website
http://www.keeway.me/models/superlight125/index.php
although recently the manual wont open i think it may be under maintance/update. but it is always worth going back to the website now then just to check.
best of luck.
811 views
Usually answered in minutes!
×