Question about 2008 Harley Davidson FLHTCU Ultra Classic Electra Glide

Open Question

2008 Harley Davidson FLHTCU Ultra Classic Electra Glide speedometer quit working

My speedometer quit working on my 2008 ultra classic it quit on the way home engine light came on too

Posted by benjamin lsterling on

Ad

5 Related Answers

Anonymous

  • 69 Answers

SOURCE: How do I change the front and rear brakes on a

Not too hard - Undo the two bolts on the caliper and then seperate the caliper and pull the old ones out. Insert the new ones and put the bolts back in to hold the caliper back together and then install them back on the bike with the two retaining bolts. Use a bit of lock tight (Blue) on the threads. Warning do not let anyone apply pressure on the brakes while you have them off the bike or you will have a mess and/or a problem.

Posted on Jun 21, 2009

Ad

Anonymous

  • 216 Answers

SOURCE: 2008 Harley Davidson CVO Ultra classic and my ABS light stays on

i wouldnt ride a bike with the brake lite on - get it taken care of

Posted on Aug 07, 2009

Ad

Anonymous

  • 69 Answers

SOURCE: 2005 harley ultra running lights quit working

I would check my wiring

Posted on Sep 09, 2009

Anonymous

  • 116 Answers

SOURCE: no oil pressure for my 2005 Harley-Davidson Ultra

camplate check valve sticking,good time for an upgrade SEcamplate,hydraulic camchain tensioners,high volume oil pump,comes as complete kit for about $420. add another $150 for adjustable pushrods and never worry about it again,or replace the existing component youd save maybe $180 bucks but youll be back
thats why they changed the camplate and tensioners in 07, I just did the complete conversion on an 02 heritage it costed with labor about 1100 in your case your looking at 7 to 800 dollars just to get you going for another 30 or 40,000 miles or less and then do it again Im for a 1 time fix myself

Posted on Apr 26, 2010

Anonymous

  • 4565 Answers

SOURCE: 2005 Harley Davidson FLHTCUI Electra Glide Ultra

To adjust the clutch, first find the clutch cable adjuster. It should be somewhere along the downtube of the frame in front of the engine. Slide the rubber bellows cover either up or down to expose the adjuster. Loosen the lock nut and turn the adjuster inwards shortening the cable as much as possible.

Remove the Derby cover from the primary cover. In the middle of the clutch assembly is an adjuster bolt and a lock nut. Loosen the lock nut and turn the adjust inwards until you feel a resistance. Don't not force the adjuster, go inwards until you feel the resistance of the throwout bearing on the other side. Try it a couple of times until you get the feel of it. Go inwards until you feel the resistance and then come back out 1/2 to 1 full turn. Lock the lock nut down and replace the derby cover.

Then go back to the cable aduster and and adjust the cable adjuster out until you have about an 1/8" freeplay at the lever. Lock that lock nut down and reposition the bellows cover.

Good Luck
Steve

Posted on Jul 21, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

On my 08 HD ultra classic, is there any way to wire my JVC KD-X35 MBS with the existing helmet to helmet intercom on the bike? @


Hi, David, the answer to this question is way above my pay grade for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix, answers, or parts inquiry. If necessary, transport your bike to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your problem.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected] Good luck and have a wonderful day.
RADIO DIAGNOSTICS. 6.1
http://www.mediafire.com/file/b4h4jnz31f8r80d/2008+Harley+Davidson+Touring+Models+Service+Manual+.pdf
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://ownersmanuals2.com/harley-davidson/electra-glide-classic-2008-owners-manual-66558
https://www.6ya.com/ to speak to me personally

Jan 05, 2018 | 2008 Harley Davidson FLHTCU Ultra Classic...

1 Answer

Harley engine codes


Do not recognize those codes, sorry.

Jun 15, 2014 | 2008 Harley Davidson FLHTC Electra Glide...

1 Answer

My harley wont start


You appear to have either a loose or corroded connector or damaged, pinched, broken wires and you will need to wiggle etc to find the problem area and fix it.

May 22, 2014 | 2008 Harley Davidson FLHTC Electra Glide...

Not finding what you are looking for?
2008 Harley Davidson FLHTCU Ultra Classic Electra Glide Logo

Related Topics:

135 views

Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6651 Answers

Mike

Level 3 Expert

4376 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1189 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...