2007 Yamaha Royal Star Venture passing lights don't work

SOURCE: royal star venture spewing gas from carbeurator

The float is stuck open. Clean the carb.

SOURCE: nissan almera brake lights not working,checked

Check the brake light switch under the dash at the brake peddle and make sure its working if it does not close when you depress the brake peddle the lights will not work You may hve to remove the lower cover for the dash to get at the switch

SOURCE: Front speakers on my 2007 Yamaha Royal Star Venture Motorcycle

I had this problem on one of my bikes and found that I had a bad ground. Wires can be broken inside the insulation. An ohm meter can be used for that. Do a continuity check on the wiring.

SOURCE: brake lights won't work. tail lights do. I

need to know if your third brake light up high is working or not.if it isn't,you need to check the brake light switch on the brake pedal with a test light,one side hot all the time,the other side should turn hot when brake pedal is pushed.

SOURCE: How do I remove the back tire on a 2008 Yamaha

CHECK THIS LINK http://www.venturerider.org/wheel/