I'm looking for a seat for Suzuki Landie fm 50

125 seat
https://www.boonstraparts.com/en/parts/mke=suzuki/mdl=gz+125+marauder+1998+2006/prt=seat-front

800 seat looks similar. Seat framing must be same size. Any seat can be made to fit.

https://www.google.com/search?q=Suzuki+Marauder+800+seat

..

Ideally, you need an FM antenna, which is usually a folded dipole loop, looking like a 'T' made of parallel conductor. The input impendance, symbol Z, is usually 50 ohms, so the F 750 may be
F Z50 with bottom of Z not visible.
F=Frequency modulated input
Z=Impedance
50=50 ohms impedance
The number '750' makes no sense, as the FM broadcast band frequency of 88-108 MHz is way below 750MHz (UHF), and impedance at 50R is well under 750 ohms.
Tip:
Although a proper FM antenna is recommended, in good reception areas, such as near a city, a single insulated wire stuck into one 2-pin FM socket or center-pin of a coax FM socket can give reasonable reception.

If you misplaced your key and want to open the seat storage of your Suzuki Access then, you just have to twist the ignition hole that is provided in your scooter and it will unlock your under-seat storage. For more clarification, I have provided a video to to open Suzuki Access125 seat lock, have a look

Hi.

Please follow the attached video.

Thanks

Look between the rider and passenger seats for two allen bolts

contact suzuki company at :
http://www.suzukiauto.com/

you can use your old seat , take it apart, and use that for a template, or the other solution, is to buy a new aftermarket seat cover, about $50

Most suzi 50 scooters used the same engines - they also produced the engines for the early SR Aprilia scooters.
I have used Suzuki parts in my Aprilia, so there's no reason you shouldn't be able to do the reverse.
I just took the bits down to the Suzuki shop and compared - you could do the same to an Aprilia outlet.
There is always Ebay France/UK as well.
Anderson Vintage Parts in the US has an enormous range of FM50 FM50A parts in stock - it looks like they bought up the worlds supply!
http://www.andersonvintageparts.com

Go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site. In the event no price is shown on a particular part, the part is not in stock. www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx

A “very helpful” rating for this answer? Thanks!

shoul be one allen head screw on the back of the back seat and 2 more behind the front seat. this will allow you to remove the passenger seat then the drivers seat will slide out from under the fuel tank