I need a video to remove top plate Suzuki 650 savage
SOURCE: fuel switch
The fuel switch has three positions:
The arrow on the handle points to the position selected.
ON = Normal operation setting. Fuel will not flow through the hose to the carb until the engine is on. Gas in the carb bowl is used to start the engine. The arrow is DOWN when in the on position.
PRI = Fuel flows through the hose to the carb at all times. This setting is used if the bike has been sitting around and the fuel level in the carb may be too low to start the engine. For safety use this setting only to fill the carb bowl with gas or for brief testing.
RES = If you run out of gas, this setting will provide extra gas so you can hopefully find more.
SOURCE: I neede to add oil to my Suzuki savage 650
If your Savage is the same as my old 1988 Savage, you probably checked the oil level in the sight glass on the side of the engine case. Make sure the bike is standing straight up when you check it. It is easiest to have someone else hold the bike while you bend over to check the level. If I remember correctly, the fill port should be on the upper side of the crankcase about 8 inches away. If it is not there, check the opposite side of the engine. I really miss my Savage, but after 13 years riding without having an accident, I figured I was living on borrowed time considering how blind the drivers around here are.
SOURCE: 1996 Suzuki Savage 650 backfires on cutoff
I had the same prob with my 97, It was not the head gasket but the O-ring on top of the head. Replaced the O-ring and has been running good for a year now with no backfire. Hope this helps.
SOURCE: Suzuki savage oil filter location
on the right site engine cover ,got three bolts on front site of the cover under this cap is it oil filter
256 views
Usually answered in minutes!
×