Is there a video on how to take off the carburetor of a 2013 Keeway Superlight 125 custom

I also have a keeway super light 125 and the tire pressure is 33 PSI in the front and back.

Run 36psi front and rear

Here it is:

Look for manuals.

http://keewaysuperlight.blogspot.com/

Pull the slide out of the carb then move the clip on the jet needle down one or two notches. This will richen the low range fuel mix. You can also get a rear sprocket with about 4 more teeth. This will get you off the line and out of the corners faster BUT it will also lower your top speed.

Please rate this solution. Thanks supergunner!

This is something you should contact a Keeway dealer for....good luck...Tim