Question about 2008 Harley Davidson FLHTCU Ultra Classic Electra Glide

Open Question

2007 harley flhtcu. radio doesnt work at all after removing tour pak. like no power

Posted by Thomas Tangredi on


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where is the speed sensor on a 2007 Harley Electraglide Ultra Classic???

Dan , VSS is under the starter in the back of transmission. may have to remove starter to get easy access. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
How to replace VSS vehichle speed sensor on 2007 FLHTCU Ultra classic...
2009 Harley FSXTC Speed sensor removal and replacement part
vss location Harley Davidson Forums
Harley Speed Sensor Fix My Hog

Jul 19, 2016 | Harley Davidson 2007 HarleyDavidson FLHTCU...

1 Answer

I wireing my tour Pak (Trunk) Has lights

If you bought the lighting kit from HD you should have instructions coming with the kit. If not or you lost them a Harley dealer either service advisor or parts person can print them off for you. If you have the tour pak and it is already wired then all you will need to do is route the wiring harness and connector out from the front of the tour pak to the area under the seat and connect it to the existing rear lighting connector. If it is not fully wired you may have to purchase necessary harness extension(s) and connector pieces from a Harley Dealer. Of course you could splice into the existing harness and solder the wires together but if the tour pak is quick removable this would make it difficult to remove it as it also would if it is not a quick removable installation type and for some reason you had to remove it from the bike at any time, so in any case you will likely be better off to use the correct harness extension and connectors etc.

Sep 14, 2014 | 2002 Harley Davidson FLHT Electra Glide...

1 Answer

How to instal lights on my king tour pak on my electra glide classic

I don't know if you can on the FLHTC Tour-Pak. I believe the FLHTCU Pak has large indentations to accommodate the lights.

May 20, 2010 | 2000 Harley Davidson FLHTCUI Electra Glide...

1 Answer

Connect Ultra tour pak wiring on 2005 FLHRSI

Your Tour-Pak lighting kit includes connectors and directions specific to your bike on where to connect. Please refer to those instructions for granular detail.

Oct 03, 2009 | 2006 Harley Davidson FLHR Road king

1 Answer

FLHTCU tour pack tail light out

the screws for the lens are on the bottom also on some king packs they are inside

May 10, 2009 | 2003 Harley Davidson FLHTCUI Electra Glide...

1 Answer

I need to remove the antenna so i can remove my bags

If you're talking about the FM antenna in the tour-pak, look inside and you will see a small screw on connector for the coax cable.  unscrew the coax and then pull it free from the wire guides on the floor of the tour-pak.  At the front left corner will be a large round rubber grommet.  Pull the grommet out and feed the wire out of the tour-pak.  The wire can be stowed behind the left side cover panel, where the fuses are.

Jan 13, 2009 | 2003 Harley Davidson FLHTC Electra Glide...

Not finding what you are looking for?
2008 Harley Davidson FLHTCU Ultra Classic Electra Glide Logo

Related Topics:


Ask a Question

Usually answered in minutes!

Top Harley Davidson Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6651 Answers


Level 3 Expert

4376 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1189 Answers

Are you a Harley Davidson Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides