Question about Kymco Motorcycles

Open Question

2005 kymco moongoose 250 won't start, replaced battery and starter solinoid i have lights but won't turn over.it will turn over if its jumped> ideas??

Posted by jenni grace on

Ad

5 Related Answers

Mikey108

Michael Zangari

  • 475 Answers

SOURCE: Starter or solinoid?

I never heard of a starter solonoid coming with shims. Did you replace the starter or starter solonoid?
What engine do you have?

Posted on Nov 20, 2008

Ad

Anonymous

  • 47 Answers

SOURCE: My Transit starter will not turn over engine,have

you probably are going to need a new flywheel,check if you have the correct starter,for automatic or manual tranny,if the solenoide spin,but if you only get a click you may have bad engine

Posted on Oct 11, 2009

Ad

Joseph Hawkins

  • 116 Answers

SOURCE: 2007 chevy cobalt ls won't

Ignition relay or fuse could be the problem. When you turn the key to start do you hear a fuel pump kicking on and or do you have spark when you hot wire the starter (I know it's hard to check while trying to start it)? You can email me back and I might be able to pinpoint it more.

Posted on Jun 06, 2011

tayjoejoe

Joe Taylor

  • 2228 Answers

SOURCE: My 2005 Yukon denali won't

My guess would be the anti theft security system. When this system starts to fail, it turns off the starter from the ignition. The fact that you can hard start it proves this. Read this link for symptoms, info, pictures, and solutions to this problem. http://vatspasslockpasskeysecurityhelp.yolasite.com/

Posted on Jun 12, 2011

baxtom

maurice44o4

  • 74 Answers

SOURCE: I have a kymco agility 50 and it won't start. It has no power what so ever, the starter won't turn over and the break light won't light when I pull the break. I checked the kill switch.

Check with a multi tester for voltage coming through the ignition switch lead wires + to switch wire - to ground you shoul get 12volt or higher, with the switch off you should have one live (feed from battery ), on you should have 2 or 3 in and out feed (possibly 2 out one for ignition one for light curuit), or disconnect the switch and check for continuity (12v battery wire and a bulb if you dont have a multi tester between each pin on the switch plug when turned on you should get a curcuit when on.

Posted on Jan 27, 2012

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Kymco 250 mongoose clicks, wont start battery solenoid are new


clicks, wont crank ??? check ground first, then suspect a bad starter as long as the solenoid and battery are good... a 12v test light will help here

Aug 28, 2014 | Kymco 2005 Mongoose 250

1 Answer

My 250 Recon won't start.


need more details but it could be as simple as a low battery ,,,, try jump leads first

Apr 15, 2013 | Honda 2005 FourTrax Recon ES

1 Answer

I have a kymco agility 50 and it won't start. It has no power what so ever, the starter won't turn over and the break light won't light when I pull the break. I checked the kill switch.


Check with a multi tester for voltage coming through the ignition switch lead wires + to switch wire - to ground you shoul get 12volt or higher, with the switch off you should have one live (feed from battery ), on you should have 2 or 3 in and out feed (possibly 2 out one for ignition one for light curuit), or disconnect the switch and check for continuity (12v battery wire and a bulb if you dont have a multi tester between each pin on the switch plug when turned on you should get a curcuit when on.

Jan 27, 2012 | 2006 Kymco Agility 50

1 Answer

My kymco xciting 250 wont start. i have not ridden it over the winter. i have gassed it up and charged the battery. when i hit the starter the lights blink on the panel but it will not turnover.


Did you warm up your Kymco during winter? If not then your first priority is to have your battery professionaly measured for cranking power capacity or get a new one..

Mar 15, 2010 | 2005 Kymco Xciting 250

1 Answer

My kymco zing only kick starts. I have a question- is it normal for the rear light to come on when you turn the key before starting? it seems to me to be a design fault or the fault of the previous owner!...


Hi, I'd check that one of the brakelight switches isn't stuck on, as if it's the park light it should put the front one on as well, some bikes have the headlight/taillight hardwired so come on with ign. on. The starter should have a fuse, check it, if ok, follow the main wires from the starter motor to the solinoid & check power's getting through with a test light (an old globe with a length of wire will do), the solinoid should have one large power cable to it from batt. with full time power, another the same going to starter that get's power when start button's pressed & a smaller one which should get power when start button's pressed (activates solinoid). if it is getting power to the starter when button's pressed, starter probably needs new brushes or just a good clean out, hope this helps.

Dec 24, 2009 | 2005 Kymco Zing 125

1 Answer

05 kymco bet&win 250 starting problems.


You need a new battery installed and have it at a full charge. If you needing to jump start it then the battery that is in it has gone bad. When you have the jumpers on all you are doing is giving it enough to turn it over a couple time that is why you need a new battery.

Nov 20, 2009 | Kymco Grand Dink 250 Motorcycles

1 Answer

Kymco people 150 when i push the starter button just a clicksound near the battery. The battery is brand new bike starts fine on a kick start.


The starter relay needs replaced. If you follow the + wire from the battery, it goes into a box with a + wire on the other side of it. If you jump power across the two wires, it should start

Jul 30, 2009 | 2005 Kymco Grand Dink 250

1 Answer

Need to order a solinoid and new spark plug but don't know what sizes to order? 2007 Kymco Grand Vista 250


take the old plug out and look at the plug number... what do you need the starter solonoid?? go to there web site and find where or a number to call to find a place to ge parts

Jul 29, 2009 | 2005 Kymco Grand Dink 250

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

279 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kymco Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6517 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...