Question about Ultra Motorcycles

Open Question

Ultra 11 h ultra 11 has. A message saying bad clock tic.what does this mean

Posted by Lana on

Ad

5 Related Answers

Anonymous

  • 2 Answers

SOURCE: can't set clock on 2006 ultra classic

i have a friend who had a simular problem he pulled the maxi fuse out of the bike for 5 min , this is suppose to completely reset the radio

Posted on Dec 20, 2008

Ad

Anonymous

  • 69 Answers

SOURCE: 2002 harley davidson ultra classic setting the clock

Turn the Bike on and the Radio off and then follow the buttons on the screen. Most people think you have to do it while it is running and this does not work

Posted on Jun 28, 2009

Ad

Anonymous

  • 91 Answers

SOURCE: screen says loading, r4i ultra

Hi,

I appreciate that you have loaded all the sorrect software, etc, but, have you tried just installing the software, Menu, moonsl, etc and then placing the sd card back in the R4i cart and turning on so that it may build the R4 menu for the dsi to use?
Then updating and copying game files over?

That was the problem i had with several of my R4 and R4i cartridges.

Hope this helps, if not let me know.

Karlos

Posted on Jul 04, 2009

Anonymous

  • 51 Answers

SOURCE: I have a 02 ultra the trouble codes are flashing

This is from www.aimag.com/.../4959-diagnostic-trouble-codes-2.html Not good news. Here is what I found for older Delphi FI models 2000-2003.

34 Current 32 Rear injector open/low
43 Current 35 Tachometer low
63 Historic 14 Loss of all ECM serial data (state of health)

You should buy a Clymer manual for your bike, unless you have the manual from the dealer and check that. Hope this helps.

Posted on Oct 09, 2009

Anonymous

  • 119 Answers

SOURCE: How do I fix the following problem: Ultra DMA

It could be caused by a fault cable.
You may also try to remove the CMOS battery, in order set the BIOS settings to default and reconfiguring it.
This may help just in case some settings is causing this problem

Posted on Mar 09, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

How do I reset the time on my ftbit




  • Clock/Time (Fitbit Ultra only)



    • The current time can be viewed on the Fitbit Ultra's display.


    • The time can be displayed in 12 hour format (e.g., 5:00 PM) or 24 hour format (e.g., 17:00). You can adjust this setting on the Edit Profile page, which affects the displayed time on the Fitbit Ultra, graphs, and input fields across the site.


    • The clock display can be disabled from the Fitbit Ultra setup screen.




0helpful
1answer

2001 FLHTCUI Electra Glide Ultra Classic: How to set the clock @

Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected] Good luck and have a wonderful day.
https://www.youtube.com/watch?v=lDeMnom40ng
http://www.mediafire.com/file/trwd3nr1nlgb2ky/2001+Harley+Touring+Service+Manual.pdf
http://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://www.harley-davidson.com/us/en/owners/motorcycle-maintenance.html
https://www.6ya.com/ to speak to me personally
1helpful
1answer

How do i initialize a sandisk ultra 11 compact

If it's a new card, go into the menu and find "format"...follow the on-screen instructions. If there are pics on the card, download them first using a card reader if necessary.
0helpful
1answer

After inserting the sandisk into my computer, I get an error message. It says I/O device error. What does this mean?

It usually means that your Input/Output device (e.g. Card Reader either internal or External) is not compatible with your Flash card which is a 'newer' high speed and high capacity medium (OR your Flash card is a new one and has not been formatted). You can check that your card reader is working by inserting a 'standard' (not ULTRA) working lower capacity card (1GB or smaller). Hope it helps: let me know hoe you go.
0helpful
1answer

I have a quantum fireball lct20 40gb hard drive that I am attempting to install as a slave drive in a Dell Dimension 2400 desktop, and while it works in other computers, I keep getting the BIOS detection...

Maxtor CrystalMax 1080
Maxtor Fireball 531DX Ultra ATA 100
Maxtor DiamondMax 16
Maxtor DiamondMax 1750 Ultra ATA 33
Maxtor DiamondMax 1750A Ultra ATA
Maxtor DiamondMax 17 VL Ultra ATA 66
Maxtor DiamondMax 20 VL Ultra ATA 66
Maxtor DiamondMax 2160 Ultra ATA
Maxtor DiamondMax 2880 Ultra ATA
Maxtor DiamondMax 30 VL Ultra ATA 100
Maxtor DiamondMax 30 VL Ultra ATA 66
Maxtor DiamondMax 3400 Ultra ATA
Maxtor DiamondMax 36 ATA 66
Maxtor DiamondMax 40 ATA 66
Maxtor DiamondMax 40 VL Ultra ATA 100
Maxtor DiamondMax 4320 Ultra ATA
Maxtor DiamondMax 536DX
Maxtor DiamondMax 60 ATA 100
Maxtor DiamondMax 60 ATA 66
Maxtor DiamondMax 6800 Ultra ATA
Maxtor DiamondMax 80 ATA 100
Maxtor DiamondMax D540X-4D
Maxtor DiamondMax D540X-4G
Maxtor DiamondMax Plus 2500 Ultra ATA
Maxtor DiamondMax Plus 40 Ultra ATA 100
Maxtor DiamondMax Plus 40 Ultra ATA 66
Maxtor DiamondMax Plus 45 Ultra ATA 100
Maxtor DiamondMax Plus 5120 Ultra ATA 33
Maxtor DiamondMax Plus 5120 Ultra ATA 66
Maxtor DiamondMax Plus 60 Ultra ATA 100
Maxtor DiamondMax Plus 6800 Ultra ATA 66
Maxtor DiamondMax Ultra ATA

mxo_ata_jumpers_1.png


Maxtor DiamondMax Plus 8
Maxtor DiamondMax D540X_4K
Maxtor DiamondMax D540X_4L
Maxtor DiamondMax D740X

Maxtor Fireball 541DX
Maxtor Fireball LCT20
Quantum Fireball CR
Quantum Fireball CX
Quantum Fireball EL
Quantum Fireball EX
Quantum Fireball LCT08
Quantum Fireball LCT10
Quantum Fireball LCT15
Quantum Fireball Plus KA
Quantum Fireball Plus KX
Quantum Fireball SE
Quantum Fireball ST
Quantum Fireball LM
Quantum Fireball AS

mxo_ata_jumpers_2.png


Maxtor DiamondMax Plus 9
Maxtor DiamondMax 10
Maxtor DiamondMax 11
Maxtor DiamondMax 17

mxo_ata_jumpers_3.png


Maxtor DiamondMax 20
Maxtor DiamondMax 21

mxo_ata_jumpers_4.png
124helpful
1answer

Samsung s8300v - how to change message and key tones

There is a fair few steps involved, but here goes :
Open you Menu, then Settings, then Phone Profiles, then clock on the ">>" Symbol beside whichever profile you mostly use (probably Normal). From there you can edit your call settings (alert type, ringtone etc).
At the top right of this screen is a drop down box where you can select from 3 menu's, one is the options menu you are currently in, the other 2 involve messaging and phone sounds. hope this helps
5helpful
1answer

2002 harley davidson ultra classic setting the clock

Turn the Bike on and the Radio off and then follow the buttons on the screen. Most people think you have to do it while it is running and this does not work
0helpful
1answer

SanDisk Ultra 11 CompactFlash Card 4Gb says "Card not Initalized"

You may need to format the card. There should be a Format command in the Setup menu. To be more specific, one would need to know which model of Finepix camera you refer to.
Not finding what you are looking for?
Motorcycles Logo

Related Topics:

341 views

Ask a Question

Usually answered in minutes!

Top Ultra Experts

Lawrence Oravetz

Level 3 Expert

10548 Answers

Brad Brown

Level 3 Expert

18686 Answers

Ngoro

Level 3 Expert

3180 Answers

Are you an Ultra Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...