Question about Kymco Motorcycles

Open Question

Kymco k pipe has no electrics after washing it is blowing new fuses

My son washed his bike and now has no electrics he tried new fuses and they blew

Posted by Lynn Cooper on


5 Related Answers


  • 1 Answer

SOURCE: Fuse keeps blowing

This is probably a water heater problem  Try operating on the lowest temp  eg.15C If it goes through the cycle then its more than likely your water heater  You will need a refit

Posted on Jun 15, 2008


Jim Gillon

  • 77 Answers

SOURCE: fuse keeps blowing out in my maytag washing machine

replace the complete lid switch ***'y. be sure to adjust properly.

Posted on Dec 03, 2008



  • 19396 Answers

SOURCE: my washing machine keeps blowing he fuse in the plug

That means that there is a short or a contact inside the machine.

The short can be on power cable, on control panel, on in the internal wiring harness.

Posted on Apr 13, 2009


  • 858 Answers

SOURCE: Trying to locate fuse in washing machine

if it bows the mains then dont try it again!
get it checked out ASAP!

Posted on Jul 26, 2009

SOURCE: Hotpoint dishwasher BF1620 blew the main fuse

This is happening because you have a very bad fault, a Phase to Earth short, problem. Leave machine UNPLUGGED, Breaker/Fuses OUT. do NOT use it, nor Touch it, It is possible to get severe electric shock. PLEASE get a registered serviceman to inspect this unit.

Posted on Feb 07, 2010

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

The machine stopped working and tripped the fuse box i changed the fuse still not working

Something electrical has blown in the machine causing the fuse to blow. After replacing the fuse , the machine isn't going because whatever blew is now "open circuit" Have a look for obvious blow outs on any of the switches, control boards , all other electrical components and the wiring. look for telltale black marks where something has "blown" on the cabinet or around the components.

Mar 20, 2017 | Washing Machines

1 Answer

My washing machine has no power to it

Could have blown a circuit breaker in your electrical panel and if you have fuses could blow a fuse. You may have a short some place. Start with checking the cord and the plug its self. If you have a GFI receptacle you may have to reset that as well

Aug 30, 2016 | Washing Machines

1 Answer

Nothing happens when the ignition switch is turned on

You should not change the wattage on bulbs as the increased load may wreak such havoc with your electrical system.

I would wonder that the main fuse would blow, do you have any power to anything?? Maybe you blew a lighting fuse.

If you find the solution please make a comment and post it.

May 09, 2014 | 2007 Harley Davidson FLSTN Softail Deluxe

1 Answer

When hitting the starter button it sparks at negative terminal

Okay first thing to do is stop trying this! check the battery connections make sure they are tight. Next dry the bike I do mean dry it with like a leaf blower or something, let it bake in the sun. You may have gotten water between any number of electrical connectors, so trying to tell you which one(s) to check would be just frustrating for you. Still check them all! If you used a pressure wash of any kind we could be in a little deeper mess. In the future only use low pressure water to wash and rinse the bike. Mr Clean makes this pretty cool "spotless" wash product, it works for me.
One last thing if you still have no luck remove the console from the tank and check you main switch there for moisture. Over time the "grease" in the main dries out and contacts corode. Gently disconnect the main (the heavy gauge wires) from the switch, and again gently blow dry the connector and switch.
If you think you need to replace the switch, take your key code and about $105 and go down to your Harley dealer and order one. Hope this helps,


Aug 21, 2009 | 2000 Harley Davidson FLHT Electra Glide...

1 Answer

Trying to locate fuse in washing machine

if it bows the mains then dont try it again!
get it checked out ASAP!

Jul 26, 2009 | Washing Machines

2 Answers

Fuse blew door light flashing and it beeps 5 times

The symptoms suggest that the door switch or wiring have failed, and shorted to ground, which caused the fuse to blow. Take apart the door switch and check the wiring for shorts.

Jun 13, 2009 | Hotpoint WMA66 Front Load Washer

1 Answer

Washing Machine won't turn on

the rating, is that the same with the original one.?
try running with no load, maybe the motor got problem. if okay no load. try run with a little load. if still blow the fuse even no load test. Your problem is in the motor. Or monitor carefully when the fuse blew, is it when the motor run ccw or cw?

Jun 10, 2009 | Fisher and Paykel (IWL12)

1 Answer

Fuse blew on my Maytag washing machine. 1 amp only and others blow. Time to buy new or service? can buy the switch assembly unit. it gets short and the fuse blows out.

May 04, 2009 | Washing Machines

1 Answer

Washer was in fill cycle and stopped

You've got a short circuit somewhere in that electrical circuit.

First, unplug the washing machine.
Replace the fuse. If it doesn't blow immediately, then there is likely a short in the washing machine, and from what you describe, it's in the motor.
If it blows, then there is something wrong in that circuit, and you can likely rule out the washing machine. Check all devices on that particular circuit, of which there can be a number of plugs.

Jan 23, 2009 | Maytag LAT3600A Top Load Washer

1 Answer

Fuse keeps blowing

This is probably a water heater problem  Try operating on the lowest temp  eg.15C If it goes through the cycle then its more than likely your water heater  You will need a refit

Jun 01, 2008 | Bosch Classixx WFC 2465 Front Load Washer

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

141 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kymco Experts


Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6528 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides