Question about kawasaki Motorcycles
Randy, after you check all fuses/relays and check all the wires and connections for pinched/damage and corrosion, kick stand safety switch if it has one, etc., if still getting the same click, it is time to remove starter, have it tested or just replaced.
Troubleshooting starter issue NSR Tech
How to Test Batteries Fuses and Relays Electrical Diagnosis 101
Posted on Jun 24, 2016
This will be either the starter solenoid is faulty or the starter motor needs replacing.Have the solenoid checked before removing the starter motor.
Posted on Mar 22, 2012
Sometimes after trying to start a bike with a weak battery the starter solenoid gets damaged,or loose connections develop on the solenoid due to heat.It should be next to the battery.
Posted on Jun 02, 2009
SOURCE: starting problem
The clicking noise you hear is the starter solenoid that switches power to the starter motor. The fact it is clicking indicates that everything up to the solenoid is working. A few things to check
Posted on Jan 05, 2009
sounds like the starter solonoid is not working properly if the batt cable got hot enough to smoke that says the batt, is ok and it is ok to jump with car, the solonoid is making the clicking noise and a real hot batt sometimes will make it work, the repair is simple and cheap if you are talented just get a solonoid repair kit three screws 5 min, and you are RIDEING.
Posted on Dec 31, 2008
Tips for a great answer:
Feb 09, 2012 | 2002 kawasaki ZZR 1200
Dec 14, 2017 | kawasaki ZXR 400 Motorcycles
Apr 17, 2010 | 1990 kawasaki ZZR 1100
Feb 05, 2010 | 2006 kawasaki ZZR 600
Jan 13, 2010 | 2006 kawasaki ZZR 250
Jan 04, 2010 | 1991 kawasaki ZZR 600
Mar 18, 2009 | 1997 kawasaki ZZR 600
Jan 22, 2009 | 1997 kawasaki ZZR 400
329 people viewed this question
Usually answered in minutes!