Question about Kymco Zing 125 Motorcycles
Year 2000, model rf25aa,engine size 125
SOURCE: Can't find manual online
kimco is a good company located in texas if i am not mistaken, check some of the motorcycle magazine or the net and find ther address, they will sell you what you need.
Posted on Feb 24, 2009
SOURCE: No power on my Kymco Zing 125
your best try is to contact your dealer, and get them to order you the short red wire that runs from the + terminal on the battery, to the starter soleniod ( also has a thin red wire that runs to fuse holder) i had exactly the same problem and this solved it. i have however re done all the electrical connections on my bike using 7amp wire and bullet connectors, as i have had many faults with the electrics before.
My bike is a Kymco Cruiser 125 (almost exactly the same bike, i use kymco zing parts when replacing) i paid approx £16 GBP for the wire.
Posted on Oct 05, 2009
Not always necessary to change the regulator/rectifier. Check all connections to make sure they are clean, use a good contact cleaner and finish off with dielectric grease on your electrical connections.
When some bikes get a few years on them the connections get dirty. Check to see if there are any burned or discolored wires anywhere around the regulator. The FIX on some bikes is to cut the connector completely out and solder the wires together and either seal them with heat shrink of a good electrical tape. Loose or bad connections get hot. As long as the regulator and rectifier are working there is no need to replace them if the connections are good.
Ride Safely, Ed
Posted on Apr 09, 2010
Tips for a great answer:
Feb 05, 2016 | Motorcycles
Nov 10, 2013 | 2004 Jeep Grand Cherokee
Oct 15, 2010 | 2000 Ford Taurus
Aug 04, 2010 | 2005 Honda CR 125 R
Nov 13, 2009 | 2003 Yamaha YZ 125
Jun 09, 2009 | kawasaki KX 125 Motorcycles
May 26, 2009 | 2000 KTM SX 125
424 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: