You can buy this
http://www.haynes.com/autorepairmanuals/zongshen/zs125gy-a Haynes Zongshen ZS125GY Repair Manuals
and/or check the local library for one and also, contact Zongshen via email:
[email protected]
I just did for you in fact.
http://en.zongshenmotor.com/?q=node/524
you can also join and post ina forum or some user group like:
Finding Automobile Repair Manuals Online
http://www.ipl.org/div/farq/autorepairFARQ.html
Chilton Repair Manuals
http://www.chilton.cengage.com/
Factory Automanuals
http://www.factoryautomanuals.com/
Factory Auto Manuals is specialist dealer in quality used factory car...
Haynes manuals
Haynes Publishing
http://www.haynes.com/
SOURCE: cam/valve clearances
my mate says that if the gaps are bigger then its ok and that it's when they are smaller that u need to do something about them is this true? bit of xtra info: the manual says inlet 0.15mm and exhaust 0.25mm clearance. my bike measures inlet 0.20mm and exhaust 0.30mm i'm just a bit concerned 'cos if the worst happens i wo'nt be able to afford a top end rebuild.You should try and keep the clearance to 0.15 in and 0.25 ex. With the de-comp it is cridical to have the exhaust clearance correct. On the early 400/450 they had some cam problems so check the shim buckets and cams are not worn.,
SOURCE: 2002 kx 125 fork oil level
3.5 inches to 5 inches from the top of the fork with the cap removed.
SOURCE: What are the valve clearances of the engine of
Valve clearances are
in 0,12 mm
ex 0,15 mm
on cold engine
SOURCE: valve clearance 94 yzf 750
valve clearance for a 1994 yzf 750 is .11-.20 in. intake, and .21-.30 in. exhaust
1,231 views
Usually answered in minutes!
×