Motorcycles Logo

Related Topics:

Shannon Weiss Posted on Apr 19, 2016

1996 Savage. After replacing the turn signal indicator relay everything fired up perfect twice, but now I get NO power or lights. Is there a certain fuse I should check? Where is it?

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Vauxhall Tigra 2007 left hand indicators work perfectly. Right hand do not although the dash RH indicator flashes rapidly and I can hear the relay ticking. Bulbs are perfect? Any ideas please?

One Side of the Turn Signal Lights Doesn't Work. ... You may be dealing with bad bulbs, a bad flasher relay, a faulty turn signal switch, or a bad wire or connector between the flasher unit and the turn signal switch.
0helpful
4answers

2002 VW Passat turn signal "ticker"

Check that all bulbs are working, if one of the indicators light is gone it will tick faster.

When this happens usually you have to replace the indicator light relay, you find it in the fuse box.
0helpful
1answer

Turn signal flasher relay location in

Turn signals use what is called a flasher to regulate the speed at which the lamps turn on and off. Usually mounted in the fuse box. I have attached the replacement model for a 1996 Roadie. Should take all of 15 seconds to replace.
0helpful
1answer

My turn signals on my 1988 Jeep Comanche dont work.

My first guess would have been the turn signal switch, which you said you replaced.
You'll have to get a wiring diagram of the switch and start testing wires for power out of the switch. Could be a problem with the main harness going back to the rear of the truck, or a ground for those sockets.
0helpful
1answer

I have a 1995 suzuki savage ,, the person who had the bike before me removed the back blinkers to convert bike into a bobber ,, i put back blinkers back in place and wired them properly and they work fine...

check all the bulbs, make sure they have the same back. if the backs are slighty different or alot different they will send power back to relay in the wrong way, causing the problems u are talking about. if they are the same, u have a power wire grounding out from the rear signals.
0helpful
1answer

96 ford f150 5 l engine, replaced pcm twice, replaced whole distributor, tested ecc and cps. Fuel pumps tested. Still won't get fire to plugs or run fuel pumps

ecc and fuel pump relays good? when the engine is turning over, does the ck engine light go out? if not the PCM isnt getting a crank sensor signal. Power and grounds all ok at pcm?
0helpful
1answer

Turn signals wont work front or rear indicators in instrument pan

you need to check your fuses if fuses are ok locate indicator relay and check it has a live and a good earth if so open the relay and you should see a bad joint inside if this is the case you can either solder it back up or sometimes they are burnt out and need to be replaced if the relay is ok check the hazard switch
2helpful
1answer

No front lights work

check the headlight relays under the hood also fuses under the hood and in the interior fuse pannel.
Not finding what you are looking for?

117 views

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...