Vacuum hoses were taken off my 2001 mazda tribute v6 3.0 i need some under the hood pictures to refer to so i can put them on myself

The pulse damper vacuum hose on a 2001 Mazda Tribute V6 3.0 connects to the intake manifold. Look for a small vacuum hose coming from the pulse damper and follow it to the intake manifold. The intake manifold is typically located on the top of the engine and will have a series of hoses and cables connected to it. The pulse damper is typically located near the fuel injectors and fuel rail. Make sure the hose is connected securely and in good condition, as any leaks or damage can cause issues with the engine's performance.

Look for the VECI (vehicle emissions information label) under the hood.
If VECI label is not enough, you need a dealer type repair manual, Mitchell,

Look for the VECI sticker under the hood, (VECI=vehicle emission control information) it will have a vacuum hose routing diagram. I hope this helps. Take care.

Matthew, Vacuum hose diagram should be under hood on a decal/label, on hood it self or on rad cradle usually. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Ford Escape 3 0l V6 Engine Vacuum Leak Testing
Escape City Ford Escape Forums Ford Escape Mercury Mariner Mazda Tribute...
Remove Upper Intake Manifold 2002 Mazda Tribute Part 1 Detaching...
2001 mazda tribute 3 0 LX Detailed vacuum EGR hose routing diagram Google...

where on the engine did u take it out from is it a vac hose or oil hose big or small

Please refer to your owners manual, it should have what the symbol stand for as I don't have visual picture to refer to. Thanks. It could be the tire pressure monitoring symbol saying that one of your tire has low pressure. I'm not sure since I cannot relate to "a small building with columns". acutally look like. But I'm sure your owners manual have it and what it is.

This URL has the diagram you need.
http://www.2carpros.com/car_repair_information/year/2001/make/mazda/model/tribute/2001_mazda_tribute_drive_belt_routing_diagram.htm

Look in the owners manual. The proper type will be listed, or under the hood might be a sticker, or labeled on the radiator cap.

it sounds like they have forgotten to hook up a vacuum hose or something along that lines.... just a suggestion for you in the future... when you go to a shop to have a part replace... put a big scratch in the surface of it .... or even better take a felt pen and sign your name on it.... you'll know right away if the part was replaced or not. lift up the bonnet and listen to the noise... from the sounds of the mechanics in thailand it could be more then one thing.

Robert

check for cracked vacuum hose between controller and the vacuum canister under the hood on the firewall.