Question about Motorcycles

IS THE REF COUNTER OPERATED BY A CABLE OR IS IT ELECTRONIC. wHEN IT IDOLS THE REF COUNTER MOVES ANT CLOCKWISE

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

0 Answers

My PGO Libra 125 ref counter moves anti clockwise when IDLING. IS IT OPERATED BY CABLE OR IS IT ELECTRONIC AND CAN I REPAIR THIS MYSELF

Mar 17, 2016 | PGO Motorcycles

1 Answer

I have a desiel pilote the rev counter does not work it is built on a boxer chasis

if you have a cable operated tacho or there is a cable to an electronic box that provides the pulse for the tacho the check that the cable is operational and is in the drive gear.

Aug 12, 2014 | Cars & Trucks

1 Answer

I forgot my password to my youniverse electronic vault, how do I open it

That is a picture of the Youniverse Electronic Lock N Safe.

Power up the safe (3 x AA battery);
Remove the batteries, then press any key on the keypad;
Replace the batteries & the safe makes a creaking sound;
Factory default open code of 0000 has now been set;
Enter 0000 on the keypad then turn knob counter-clockwise & pull door open.

Jan 05, 2014 | Summit Appliances Division Youniverse...

1 Answer

The car can not idle it will stall out and very difficult to start

FIRST THING THAT I DID WAS SOME FUEL INJECTOR CLEANER,NEW PLUGS,CHECKED ALL VACUUM LINES,CLEANED THE THROTTLE WITH A CAN OF CHOKE CLEANER.BUT WARNING DO NOT START YOUR CAR UNTIL YOU PUT THE THOSE BACK ON THE THROTTLE BODY.CHECK ENGINE LIGHT WILL COME ON.MY LAST RESORT WAS AND AJUSTMENT I FOUND IN FRONT OF THE THROTTLE BODY GAS PEDDLE CABLE IT'S A HORSESHOE CLIP YOU AND TURN ALIITLE COUNTER CLOCKWISE TO REMOVE AND PUT IT FORWARD TILL IT IDOLS A LITTLE OVER 1000 RPMS.SO WHEN YOU PUT IT IN GEAR IT WILL IDLE AROUND 750 TO 800 RPMS GL

Oct 12, 2011 | 1999 Saab 9-5

1 Answer

How do i set the date on a locman ref 487?

To set the date you pull out the winding knob to the first stop and turn it either clockwise or counter clockwise to set the date. The second stop, or the stop furthest from the body sets the time.

Mar 07, 2010 | Locman LOC487MOPFBK wristwatch

1 Answer

How to do you adjust the belt on a Pro form crosswalk 380? The belt is getting loose and I lost the manual.

To adjust the belt: Less Belt Tension: turn both adjustment bolts on back of treadmill in a counter-clockwise direction. More Belt Tension: Turn both adjustment bolts equally in a clockwise direction. Center Adjustment (moves belt center to the left): Turn left-side adjustment bolt counter-clockwise. Center Adjustment (moves belt center to the right): Turn the left-side adjustment bolt clockwise.
An over tightened walking belt can raise the amp draw of your treadmill, contribute to seam separation on the walking belt, or both, so do not over tighten the walking belt.
You should be able to lift the belt in the center on the side by approximately 2” to 3”, if you cannot lift it by 2” to 3”, the belt is too tight.

Feb 20, 2010 | Proform 730 Folding Treadmill Model...

1 Answer

Changing the date on a fossil watch- how do you do it?

Which Fossil do you own?

Analog Date Watch:
Date Setting

Pull the crown out to position 2.
Turn the crown either clockwise or counter-clockwise and set the date for the previous day. The direction that moves the date varies on different watch models.

Analog Automatic:
Time and Date Setting

Pull crown out to position 2 and rotate clockwise to set time.
Pull crown out to position 3; date will advance automatically. To set to required date, continue to rotate crown between positions 2 and 3.
Push crown back to position 1.

Analog Digital:
Time and Calendar Setting

Press and hold pusher A for 2 seconds to enter setting mode. Year will begin flashing.
Press pusher A to select year, month, date, hour, minute, second, and then exit setting mode.
Press pusher B to adjust digit.
Press and hold pusher B to adjust digit automatically.
If no pushers are operated for 30 seconds, setting will be returned to Normal Time Display.

These are the three most common Fossils. If yours isn't here please let me know which model you have and I'll get you the instructions.
Hope this helps.

Dec 12, 2009 | Fossil Watches

1 Answer

Where is the idle screw for carb. on 1984 ford f-150,2bbl,5.0 liter?

It is on the plate that moves and attaches to throttle cable. This plate rests against the idle screw. Turn clockwise to increase and counter to decrease.

Sep 23, 2009 | 1984 Ford F 150

1 Answer

Luminox bezel

Grab the knurled edge of the bezel and turn counter clockwise. It only moves in one direction- to the left, counter clockwise.

Mar 14, 2009 | Luminox Navy SEAL Dive 3901 Wrist Watch

4 Answers

Jaguar x type rear brakes change

On the rear brakes on this vehicle you have to screw the calipers in.

As the post above states for solid caliper pistons (which this vehicle has on the rear), there is a tool for this and you can rent it at AUTOZONE. ALSO REMEMBER, if you turn the brake caliper piston Clockwise and it does not go in, turn it COUNTER CLOCKWISE. I cannot remember which side is counter clockwise, but I think it is the left hand side (as you sit in the car).

Sep 23, 2008 | 2002 Jaguar X-Type