How to wire the coils on a 1996 kawasaki vulcan

SOURCE: gas tank

I'm pretty sure it does. I own a 1995 Vulcan and I bought a 2003 tank and looked at the mounting brackets and fuel connections all looked to be the same - but don't put this in stone. I haven't been able to put it on yet because it's still out being painted. There should be no difference in the fuel tank mounts from 1996-1005, but as always, check with a professional if this information is critical.

SOURCE: oil capacity

The oil capacity of a 1996 Kawasaki Vulcan 800 is 2.9L with a filter change, 2.8L without, and 3.1L for a dry engine.

SOURCE: Any way to adjust the rear shocks on a 1996 vulcan 1500-a10 ?

dear susan shock adjustment for the rear shock are done with c wrench. you will notice at the top of the shocks there is a ring with 3 adjustment cams. the wrench is placed in the two holes you see on the shock opposite each other this is where the wrench fits you simply turn either direction for softer or harder ride. this adjustment puts more or less tension on the spring. i own a 96 vulcan as well hope this will help you jim

SOURCE: confused about wiring a tach on my '05 Kawasaki Vulcan 1500

go to gadgets fix it page, they have diagrams and step by step instructions to do this, i use his site religiously you can find anything there about your vulcan

SOURCE: where do you fill the coolant in a 1996 kawasaki

Remove the instrument cluster located on the gas tank. There should be one 8mm bolt in the center holing it on. After removing the bolt, gently push the housing forward. Underneath you will see a small reservior with a radiator cap on it.