Question about Honda Motorcycles
Head bolts are torque to yeild so you MUST use new bolts.
Tighten cylinder head retaining bolts in numerical sequence in three steps as follows:
Posted on Mar 19, 2009
SOURCE: head bolt torque spec
Always use new head bolts.
1)tighten to 40ft/lbs
2)back off 1/2 turn
3)tighten back to 40ft/lbs
4)tighten an additional 90 degrees
5)tighten an additional 90 degrees.
Posted on Aug 16, 2009
Tips for a great answer:
Mar 15, 2009 | 1984 Honda VT 500 C Shadow
Feb 08, 2021 | Honda Motorcycles
Jan 05, 2021 | 2001 Honda Valkyrie Interstate
822 people viewed this question
Usually answered in minutes!