Question about 2007 Kymco Venox 250

1 Answer

Does anybody know where I can get a head cylinder for a 2007 kymco venox 250cc

It broke the rocker arm in it... & not really sure why or what caused it, if I replace the head, will it just go out again due to another problem? Bike only has like 3 maybe 4 thousand miles on it...

Posted by jeremy poulton on

Ad

1 Answer

james laughton

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Kymco Master
  • 2,195 Answers

Try eBay or a motorcycle part finder site
And on the problem of it reoccurring difficult to say as need to know what damage was caused to piston and valves
Was it just one rocker arm that broke or is the other damaged did the timing jump and piston hit open valves driving them up and breaking arm and damaging cam shaft lobes
You really need to find out why and how it happened
As it may require a complete timing system replacement on that cylinder cam shafts , rocker arms , valves ,drive sprockets top and bottom , drive chain and a piston

Posted on Sep 02, 2015

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2009 Kymco Venox 250 neutral light not working


Hi, Mark and the usual suspects are:
1. Neutral light bulb burnt out.
2. Faulty neutral switch.
3. A loose bulb in the socket.
4. Faulty wiring from the neutral switch to the light.
5. If the neutral light stays on while the bike is in gear the wire from the light to the neutral switch is grounded.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://advrider.com/f/threads/green-neutral-light-not-showing-so-wont-start.798471
How kickstand switch causes no start situation
KYMCO VENOX 250 Service Manual
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
https://www.kymcousa.com/admin/dealeronly/ownerman/onroad/Venox250.pdf

Oct 12, 2018 | 2009 Kymco Venox 250

1 Answer

2003 Kymco Venox 250 will not shut off


Hi, Peter for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kymco, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Kymco Venox clutch noise Irregular Rotation Resistance
how to fix gy6 Scooter wont turn off kill switch not working Great Prank...
KYMCO VENOX 250 Service Manual
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
KYMCO Venox 250 Driver Manual

Sep 16, 2018 | 2003 Kymco Venox 250

1 Answer

2009 Kymco Venox 250 front turn signal


Hi, Daniel for more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Motorcycle Lighting Indicators for KYMCO Venox eBay
https://www.cyclegear.com/motorcycle/2009-kymco-venox-250
KYMCO VENOX 250 Service Manual
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
https://www.kymcousa.com/admin/dealeronly/ownerman/onroad/Venox250.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 17, 2018 | 2009 Kymco Venox 250

1 Answer

2009 Kymco Venox 250 fuel line diagram


Hi, Sam for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kymco, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2009 Kymco Venox 250 fuel line diagram Google Search
KYMCO VENOX 250 Service Manual
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
KYMCO Venox 250 Driver Manual
KYMCO Venox 250 Specifications KYMCO USA

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Sep 13, 2017 | 2009 Kymco Venox 250

1 Answer

The location of cam sprockets were the marks should point when piston is at TDC on a 2000 kymco venox motorcycle


Hey Scott.. not sure of the marks.. BUT the cam lobes should be opposite of the rocker arms or buckets,,, ON TDC on the COMPRESSION STROKE<<

Jul 24, 2017 | Kymco Motorcycles

1 Answer

Timing marks for a kymco venox


Hi, Scott for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kymco, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing and printing please click on the blue links below. Good luck and have a wonderful day.
Timing marks for kymco venox Google Search
KYMCO VENOX 250 Service Manual
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Parts...
KYMCO Venox 250 Driver Manual
Kymco 250 Venox 2005

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 24, 2017 | 2005 Kymco Venox 250

2 Answers

What's causing valve tapping?


Some tapping is normal with age and mileage. Wear on the cam and lifters and followers causes it.

Apr 08, 2016 | Cars & Trucks

1 Answer

2006 Veno 250cc motorcycle. Where is the fuse box located?


Hi, Byron sorry you can't find the first and best tool you ever bought for your Kymco despair, not for a mere $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please visit the websites below. Good luck and have a nice day. http://www.dailymotos.com/wp-content/uploads/2012/01/Kymco+Venox+250250i+EN.pdf
Kymco Scooter Parts ATVs Scooter Parts Performance Scooter Pa http://www.kymcousa.com/owners/onroad/Venox250.pdf
Kymco Venox 250 2006

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 05, 2016 | Motorcycles

1 Answer

Why wont the rocker arm go up or down on left side of my generator and how do i fix it.i replaced the rocker arm on that side it was broke .the bolt was broke


Several reasons why an OHV rocker won't work.

  • Push rod not installed in the lifter.
  • Stuck valve
  • Valve guide work loose jamming valve movement
  • Bad cam lobe.
Are just a few possibilities.

May 29, 2015 | Electrical Supplies

1 Answer

I have an 03 malibu with a 3.1 litre. Replaced the head and intack gaskets. All back together and 2 rocker arms bolts broke. So i got new head and same two rocker arm bolts broke again why


It sounds as though something is wrong with the valve or camshaft timing and valves are touching the pistons.

If the bolts broke and you hadn't got that far it is possible you haven't turned the engine back a little before fitting the head or ensuring the cam timing is almost correct before refitting the head.

Mar 15, 2015 | 2003 Chevrolet Malibu

Not finding what you are looking for?
2007 Kymco Venox 250 Logo

142 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kymco Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6379 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...