SOURCE: how does a 2002 kawasaki ninja 250r act if the clutch isnt adjust
if there is no free play when pulling the lever in, the bike will most likely take off from first gear, but when you throttle it, the clutch will most likely slip. if the lever is to loose, lots of free play, you may have a hard time getting it in gear. approx 1/4 inch free play with the lever and it will work normal... unless its ready for a new clutch. hope this helps...
SOURCE: Check/Replace spark plugs
You bike might of came with the tools under the seat . Thats all you should need . You might need to remove the fairings and/or gas tank . If you have under 100,000 miles . You shouldnt need new plugs . It dont hurt to check .
SOURCE: would the fairing parts of a 2006 kawasaki ninja
Yes I do believe they do. Try going to Powersportseast.com Look in the shopping section on the left of the homepage. You will want to use the parts fische and load the info for your bike. It allows you to see what the dealer parts counter can see. See if this helps. I'm pretty sure the 250 ninja really didn't change until 2008 when it got the BIG overhaul
Testimonial: "Thanks Fixya"
SOURCE: How to install front turn signals onto a 2004
If your are replacing the old one, its easy. Just locate the nut at the end of the turn-signal, disconnect the wires, and separate them. Remove the holding nut at the end of the turn-signal. Put in the new turn-signal.
SOURCE: instructions on a 2004 kawasaki ninja fo a valv
for this verry involved job I suggest you obtain a workshop manual and familiarise your self with it
150 views
Usually answered in minutes!
×