2013 Kymco Agility 50 Logo
A
Anonymous Posted on Aug 11, 2015

Why won't my Kymco start? Has power to everything and the relay swifch clicks, that's all it will do

2 Answers

Claude Kayser

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Kymco Master 9,098 Answers
  • Posted on Aug 11, 2015
Claude Kayser
Kymco Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Jun 15, 2015
Answers
9098
Questions
0
Helped
5063600
Points
28436

KYMCO Agility 50 Scooter Online Service Manual ...

https://www.cyclepedia.com/...manuals/kymco...scooter...repair-manuals/...
The CYCLEPEDIA PRESS LLC KYMCO Agility 50 Scooter online service manualfeatures detailed, full-color photographs and wiring diagrams, complete ...

Mark Hanson

Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

  • Contributor 25 Answers
  • Posted on Sep 16, 2015
Mark Hanson
Contributor
Level 1:

An expert who has achieved level 1.

New Friend:

An expert that has 1 follower.

Hot-Shot:

An expert who has answered 20 questions.

Corporal:

An expert that has over 10 points.

Joined: Aug 15, 2015
Answers
25
Questions
0
Helped
6962
Points
38
Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Why won't it run

have you checked the relay between the battery and the starter?
i had a ltd 2 that suddenly refused to start after trying everything else it turned out to be a little black box(relay) on the fender well between battery and everything else!
0helpful
1answer
0helpful
1answer

I have a kymco agility 50 and it won't start. It has no power what so ever, the starter won't turn over and the break light won't light when I pull the break. I checked the kill switch.

Check with a multi tester for voltage coming through the ignition switch lead wires + to switch wire - to ground you shoul get 12volt or higher, with the switch off you should have one live (feed from battery ), on you should have 2 or 3 in and out feed (possibly 2 out one for ignition one for light curuit), or disconnect the switch and check for continuity (12v battery wire and a bulb if you dont have a multi tester between each pin on the switch plug when turned on you should get a curcuit when on.
2helpful
1answer

The car won't start; lights, ac, radio etc come on but car won't turn over or even click; checked battery cables; put different battery in; still won't start

Check the starter and the starter relay or fuse. A client of mines car was doing the same thing, it ended up being two issues, the starter not working anymore, and a relay that was bad. If I am not mistaken everything should be labeled in the fuse box under the hood and will tell you where the fuse/ relay is for your vehicle
2helpful
1answer

Kymco Vitality 2t 50 won't turn over. When I try to start the Kymco scooter, it tries to start, but it doesn't fully ignite. I try to kick start the scooter also, but that also fails to start the...

Take your spark plug out of the cylinder, reconnect it to the ht lead and place it on to your frame if you see a spark then your coil is fine, try a new spark plug, if there is no spark get a new coil and plug.

Remember there is a 2t and a 4t version of the kymco vitality and the spark plugs are different.
0helpful
1answer

I Have a 94 cherokee country with a 56028297 ecu,it has no power at the grey wire at the ecu,it does flash sometimes and I can hear the relay work sometimes. I can bypass the fuel pump relay circuit and...

If you hear relays clicking sometimes and the jeep won't start, at those times, is the check engine light illuminated on the dash, or not? If no check engine light is on the dash, at times when the jeep won't start, your ecu is in need of repairs. The ecu sends power to the ignition and fuel relays and when the ecu starts to malfunction, the relays usually start clicking.
Not finding what you are looking for?

1,460 views

Ask a Question

Usually answered in minutes!

Top Kymco Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...