Question about 2005 kawasaki KX 250

2 Answers

My dirtbike clutch doesnt work right

Okay so one day my clutch was working great
i put it away then a few days later i went to pull it out and i pulled the clutch and went to walk it outta the shed and it didnt move
its like the bike was still in gear
any ideas?

Posted by northpoint04 on


2 Answers


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that gotĀ 5 achievements.


    An expert whose answer gotĀ voted for 20 times.


    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 115 Answers

Make sure that the cable is still working and hasn't broken from freezing up since it was parked. Had the clutch been causing any problems in the past? This clutch is not adjustable at the base where it mounts to the engine. Adjust the cable if needed from the handle. If this doesn't help, then it sounds like an internal problem. This would require taking off the right side of the motor. Just get a new gasket, and a clutch kit. The basket might be able to be saved with emory cloth. You can get a clutch kit at

Posted on Jul 05, 2009


sean wood

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 4 Answers

Change your oil to atf that is for a wet clutch

Posted on Mar 05, 2013


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

2003 Scenic 1.9DCI, new clutch, slave flywheel fitted 18 months ago after clutch failure. Last month pedal went flat to the floor and unable to put into gear. Bled system, car ok for a couple of days then...

There are only a few places air can get in the master cylinder and connections the pipe going to concentric slave the connections to slave or slave itself

Feb 05, 2015 | Cars & Trucks

1 Answer

Motorcycle sputters and has trouble starting

My guess would be you had water in the fuel. going up the hill put the water in the floatbowls right in the pickups for the carbs and going down pulled the water away.

Jul 05, 2012 | 2001 Yamaha YZF-R6

1 Answer

Drove my '99 Stratus through high water & wont start 2 weeks later

If water went over the hood and into your air cleaner there's probably water in your engine. change your oil. Pull your spark plugs, leave them out for a few days to let any water in there dry out. pull your air cleaner, if it's wet, throw it away and get another one. After a few days pour some Marvel Mystery Oil into your spark plug tubes or spray PB Blaster (encase your pistons are rusted to the block)

This may not get it working, if there was water in the engine when your were trying to start it you may have bent the valves, water doesn't compress.

However I would do these things before condemning your engine.

Nov 25, 2011 | Cars & Trucks

3 Answers

Won't start every time, when it does runs rough

test fuel pump pressure seems like its faulty i think your right

Jan 03, 2010 | 1996 Ford F150 Regular Cab

1 Answer

Maytag mav7600 agitator works and don't

Look at timer plug on harness for pins that are sticking out from side of timer plug, away from timer. See if they are all in the same amount. Sometimes one can work its way out so it won't make a good contact. Push in to plug if you find one.

Nov 14, 2007 | Maytag MAV7600 Top Load Washer

Not finding what you are looking for?
2005 kawasaki KX 250 Logo

637 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6480 Answers


Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides