Question about 2013 Suzuki RM-Z 250

Open Question

2013 Suzuki RM-Z 250 fork oil capacity

I am replacing the fork seals in my 2013 Suzuki rmz 250 and need to know the oil capacity in each fork I know that they are the new stiff forks so just needing the oil specs for replacement @

Posted by Anonymous on


5 Related Answers


Graeme Ross

  • 1512 Answers

SOURCE: front fork oil capacity

You can download the whole workshop service manual that has this info and heaps more from here. Hope this helps Thanks for using Fixya. 
regards robotek

Posted on Jan 10, 2009



  • 52 Answers

SOURCE: i have replaced fork seals

I am assuming the old oil is drained.
Once the tops are opened, lift the bike onto the center stand which will make the forks extend. Refill through the top of the fork with 12 oz of fork oil. The manual states that you must use oil with a weight of approximately SAE 3, and the amount going in needs to be equal in each fork.
Hope this helps

Posted on Mar 25, 2009



  • 132 Answers

SOURCE: how much is the fork oil capacity for 230crf, just

try 150mls per leg. if a little soft add another 10mls to each till you get them to how you want,ie hard/soft

Posted on May 28, 2009


  • 1 Answer

SOURCE: fork seals and oil capacity

fork oil capacity is 578 to 586cc

Posted on May 30, 2009


  • 677 Answers

SOURCE: front fork leaking oil from bottom of the seal.

Before you take it to the shop try this.Get some camera film,Cut the notched edge of it and trim the top to an angle of 45 deg..Slide this up into the fork seal and working it up and down,slide it all the way around the seal.When you get the feel of it,you can feel tiny bits of grit.This will clean the grit out 99% of the time.I always keep a piece of film in the toolbox.

Posted on Jul 16, 2009

Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Im changing oil on 05 rmz 450. i need to know oil capacity and where the oil filter is located

when changing both oil and filter use 1450mls of oil if only oil change use 1400mls but always check oil level after change

Sep 30, 2010 | 2005 Suzuki RM-Z 450

1 Answer

Replacing fork seals and need to know amount of oil for outer fork on a twin cartridge tpye fork rm250 2005

Outer cartridge on the twin chamber Showa fork for an RM250 uses 350ml of 5W oil.

May 14, 2010 | 2005 Suzuki RM 250

1 Answer

What is the fork oil capacity for rmz 250cc 2008???

go to CARL SALTERS MANUALS and you will get a list of bike manuals find rmz250 and click on it and down load it for free it will tell you everything that you could ever need to know about your bike plus diagrams best of luck with your bike

Dec 22, 2009 | 2004 Suzuki RM-Z 250

1 Answer

I have a 2001 rm 250, my front forks have gone totaly, what could the problem be?

fork seals might be gone, lost all the oil. replace seals and oil.

Nov 16, 2009 | Suzuki RM 250 Motorcycles

Not finding what you are looking for?
2013 Suzuki RM-Z 250 Logo

Related Topics:

553 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

85239 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6480 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides