Question about 2006 Suzuki Burgman 650

1 Answer

How to reset oil change light on 2002 650 burgman sazuki

Cant find corect mode

Posted by Anonymous on


1 Answer

Rich Graver

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 63 Answers

650 - Resetting Oil Change Indicator
(The Owner's manual is not very clear on this)

  • 1) Turn off ignition.
    2) Hold both the SELECT and RESET buttons in.
    3) Turn ON ignition
    4) After 2 seconds the indicator to change oil should extinguish.

Posted on Aug 13, 2014


Add Your Answer


Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Where can i see rectifier on my burgman 125uh 2003 model..which part of the scooter thanks in advance

650 Regulator Rectifier experience - Suzuki Burgman Forum - BurgmanUSA
Apr 18, 2012 - This is my experience swapping out my rectifier with an aftermarket Mosfet unit. I have no long term review right now but here are some ... scooter stalls at low rpm's - Suzuki Burgman Forum
May 23, 2015
Starting / Electrical issue with 2008 Burgman 400 - Suzuki ...
Feb 14, 2013
2003 650 CVT motor issues! - Suzuki Burgman Forum
Dec 9, 2010
OIL LIGHT ON - Suzuki Burgman Forum - BurgmanUSA
Apr 17, 2004
More results from

How to wire a GY6 scooter regulator / rectifier and how it all ...

? 4:56

Oct 28, 2009 - Uploaded by serpentza
How to wire a GY6 scooter regulator / rectifier and how it all works (Part 3 .... My scooter has no spark how to fix. gy6 chinese scooter 139qmb ...

Oct 28, 2015 | Motorcycles

1 Answer

How do I change the oil on a Suzuki Burgman?

I could explain it but this video will point you in the right direction.

Oct 23, 2015 | 2005 Suzuki Burgman 650

1 Answer

How to shut off the change oil light when you change the oil

The instruction are on page 112 of manual (link to PDF below)
Driver Controls (Oil Minder)
Reset oil life mode
To reset oil minder when the vehicle oil is changed:
1. Press the MODE button repeatedly until one of these three
messages is displayed; OIL LIFE XX%, CHANGE OIL SOON or
2. Press and hold the MODE button for 5 seconds until RESET FOR NEW OIL LIFE is displayed.
3. Press and hold the RESET button for 2 seconds. The oil life value will be reset to 100%
Note: If the RESET button is not pressed after one minute of no activity, the original oil life will be restored.
Note: If power is interrupted during the reset oil life mode, the overhead console resets the oil life to the original value

Mar 19, 2015 | 2004 Lincoln Town Car

1 Answer

Oil light is on and engine in limp mode

check the oil level in the sump, coolant level, coolant temperature (overheating), transmission oil level if auto. The limp mode is energised by any number of sensors that register a fault that is detrimental to the engine/ gear box. Run the fault codes and repair any faulty units . Reset the CPU with a scanner .

Jul 02, 2014 | 2005 Holden Rodeo

1 Answer

Hi, need to know how to check transmission fluid and gear oit?

I could write down the chapter in the service manual for you and soon you would be lost, or, you could go to YouTube and search "Burgman 650 Transmission Oil Change" and see how the pros do it. I reccomend adding it to your favorites list as it is not done very often and a refresher is good for the second time you do it. Change the oil and filter plus the rear drive oil while you have the covers off.

Nov 04, 2010 | 2003 Suzuki AN 650 Burgman

1 Answer

When i changed oil i forgot to follow the corect proceedures,so now i reading in dashboard of my car . change oil soon . later i follow the proceedures in cataluge , but same sentence appear pls. advise

this light is triggered only by miles. you will probably need to go to the dealer to reset this light. in the meantime try this: 1. Turn the key to the "ACC" position which is the notch that allows power but doesn't turn the engine.
2. The display will read change engine oil soon - hit the display button(i) and the display will read 0% oil life.
3. Hit reset button (the check mark button) for 5 seconds and the display will change to 100 % oil life.
4. It may not work the 1st,2nd,3rd .... attempt , but will work eventually.

Nov 09, 2009 | 2007 Suzuki XL-7

1 Answer

Change oil light reset?

Hi Shady, here is the procedure for resetting the light.
Resetting Procedure
Follow this procedure to reset the GM Oil Life System™
  1. Turn the ignition to RUN, with the engine off.
  2. Fully press and release the accelerator pedal three times within five seconds.
  3. If the CHANGE OIL SOON light flashes, the system is resetting.
  4. Turn the key to OFF after the light has finished flashing, then start the vehicle.
  5. If the CHANGE OIL SOON light comes back on, the engine oil life system did not reset. Repeat the procedure.
With Trip Computer
  1. Press the MODE button until the light appears next to OIL LIFE.
  2. Press and hold the RESET button for three seconds. The oil life percentage should change to 100 percent.

Nov 02, 2008 | 2002 Pontiac Grand Prix

Not finding what you are looking for?
2006 Suzuki Burgman 650 Logo


Ask a Question

Usually answered in minutes!

Top Suzuki Experts


Level 3 Expert

85239 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6618 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides