Spark plug gap 1994 suzuki 1400 - 1994 Suzuki VS 1400 Intruder

All in this links but

1400 Nissan bakkie by default you set the spark plug gaps .55 to .60 and the point gap .45 to .55

https://www.google.com/search?q=2006+Nissan+1400+Champ.+points+gap+and+plug+gap

..

0.8mm

Iridium Spark plugs for SUZUKI APV - Auto Brake Parts

https://autobrakeparts.com.au > shop > spark-plugs > iri...
Engine Capacity: 1.6L · Cylinders: 4 · Engine Type / Code: G16A · Camshaft / Valve: SOHC · Gap Setting: 0.8mm.
A$42.95 · ‎In stock
Missing: 2017 ‎' Must include: 2017

Spark Plug Gap Chart - Brisk USA

https://www.briskusa.com > spark_plug_gap_spark_plu...
For reference, see our spark plug gap chart below, this chart converts metric measurements to standard. How to Change Spark Plugs - Spark plug Gap setting and ...
Missing: APV ‎' Must include: APV

SPARK PLUG CATALOG - DENSO Global

https://www.denso.com > plug > pdf > catalog_generic
PDF
This may cause the spark plug to crack internally or the gap to be narrowed, preventing it ... SUZUKI ?12 long-reach iridium plug. Iridium plug. ZXE20HR13.
396 pages

.028"

Check this out,,,, Pull the plug , ark plug on frame,turn over motor and check for spark, No spark change coil....My 800 runs great on one cycl.

the manual calls for 0.028 to 0.032inches.

They are NKG CR9E spark plug and the gap should be (0.7 - 0.8 mm) standard (0.028 - 0.032 in)standard

Most bikes is under the seat.

The same problem with my intruder. Make sure the battery is good. I mean really good. Good amps and voltage. I replaced mine and haven't had a problem since. Also make sure that the plug gap is right on both plugs. Replace and gap the plugs if need be. Check to make sure that the plug wires at the plugs are inserted as they should be . A lot of times when you pull the plug wires from the plugs they come loose. They screw onto the insulator. One day I was riding and lost power to one cylinder and reached down and grabbed the plug wire and got a jolt. I screwed the plug insulator back on and off I went. Make sure that the plug wires arn't grounding out to the frame at any point. If so replace the plug wires. This was another problem I found. Good luck and Ride Safe. David.

your gonna have to pull the tank to get to the spark plugs.and for the coolant just locate the plug on the bottom of the radiator.and your good to go!