Question about 1998 kawasaki ZX-9R Ninja

Open Question

1998 Kawasaki ZX-9R Ninja fork oil capacity

Zx9r fork oil quantity @

Posted by Anonymous on

Ad

3 Related Answers

ginocussen

Gino Cussen

  • 217 Answers

SOURCE: fork oil type & quantities ?

Here you are. Rate me?
http://www.myxmanuals.com/modules.php?name=Downloads&d_op=getit&lid=820

Posted on Mar 19, 2009

Ad

tombones

  • 3567 Answers

SOURCE: fork and engine oil for kawasaki kle 400 from 1993

Get the fork oil from the Kawasaki dealer and he will give you the right oil and tell you how much is needed. The gearbox oil is 10w40, any major brand is fine. I think your bike has a oil dipstick? If not then the oil capacity should be on the casing by the oil fill. Worst case, ask the dealer while you are there!
Best wishes and I hope this helps.

Please rate this solution. Thanks Robert!

Posted on Apr 06, 2009

Ad

Anonymous

  • 12 Answers

SOURCE: front fork oil zxr250

400cc Of 10w ( Rsf)

Posted on Oct 26, 2009

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How much oil should i put back in the fork after a seal change on a 2001 mx 50


The Marzocchi Workshop: oil quantity's & levels

marzocchiworkshop.blogspot.com/p/oil-quantitys-and-levels_858.html
Oil quantity's are measure in volume in 'cc', always use a narrow measuring jug for ...MY, Fork, Measurement, RH, LH .... 2001, Z-1 MCR QR20+ 01, Height (mm), both legs, 50 .... 2003, MX PRO COIL c.105 SSVF, Height (mm), both legs, 50.

Aug 19, 2015 | Motorcycles

1 Answer

2007 Harley Davidson FXSTB. Changing fork oil and have misplaced my manual. How much fork oil do I put in the tubes after all drained ? Appreciate your help!


I'm sorry but I don't have that information on the newer bikes. I specialize in the older bikes that the dealers will no long work on. You can call the service department of any local dealer and they should tell you how much oil goes in it. Ask for the "wet" quantity. This is the amount of oil you add when you simply drain and refill the fork tubes. If you disassemble the fork tubes, you need to add the "dry" quantity of oil.

Good Luck
Steve

Aug 27, 2011 | Harley Davidson FXSTB Night Train...

1 Answer

I have had the same fork leak after being replaced two times,on my o1 rd king,whats the deal was that a bad year fork seals,leaking again.


First off, make sure you or whoever is doing the work is installing the correct seal in the proper direction. A seal put in backwards will leak like crazy. Also, make sure you're putting the correct amount of fork oil in once you get finished. There are usually two different quantities of oil listed. One is a "WET" quantity that you add when you simply drain the tubes and refill them. The other is a "DRY" quantity that you put in whenever you disassemble the tubes. I usually use 30 wt. fork oil. You shouldn't be having a problem unless you have something really bad wrong. The fork tube must be sized to fit the bushings inside the lower fork tube (slider) so the seals should work.

Good Luck
Steve

Apr 19, 2011 | 2001 Harley Davidson FLHR - FLHRCI Road...

1 Answer

1999 FZX250 Zeal, need the fork oil grade and quantity per leg


You can use Castrol 10 fork oil which is a mediocre type or Castrol 15 for hard rebound. The quantity should not exceed 250 ml per leg. Cheers

Nov 18, 2010 | 1993 Yamaha FZX 250 Zeal

1 Answer

Front fork oil capacity for a c90 boulevard


The service manual specifies a level and quantity. 192mm (7.56 inch) from the top of the fork tube with the spring removed and fork compressed. The quantity should be 416mL (14.1oz)

Aug 18, 2010 | Suzuki Boulevard C90 Motorcycles

1 Answer

Honda FMX 650 - quantity of hydraulic oil


The best way,is to drain a fork leg into a container, and measure the amount. however if you cant do that, start of with about 100ml in each leg, test them out, if to soft, you can always add a little more oil. from memory, a 250ml bottle of fork oil was enough to do both legs on most bikes.

Apr 17, 2010 | 2006 Honda FMX 650

1 Answer

What grade of oil is used in the forks of a 1991& what quantity


oil: silkolene medium fork oil
quanity: 280mls each leg

Nov 03, 2009 | 1985 Yamaha XJ 600

1 Answer

Oil quantity on fork


You will need approx.8 to 9 ounces in each tube if they are still wet.If they are dry complete capacity is 10 ounces.I hope this helps.

Mar 06, 2009 | 2000 Harley Davidson FXSTB Night Train

3 Answers

KX 125 (2003) motorcycle


its 120 mm or 4.7 inches from the top of the fork
Some measure the oil quantity and fill the fork up, some fill the fork up and measure the oil level. The most correct method is to measure the level, I guess, but many guys measure in quantity.. both ways work well.
1dcced6.jpg

Nov 26, 2008 | 2003 kawasaki KX 125

Not finding what you are looking for?
1998 kawasaki ZX-9R Ninja Logo

Related Topics:

427 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6480 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...