Question about 2000 Yamaha XVS 650 Dragstar Classic

Open Question

2000 Yamaha 650 vstar classic has a fault code 33

I changed out the stator and now I am getting a fault code of 33.

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: 2007 650 yamaha vstar popping through the rear cylinder exhaust

First off did you buy it new? Second has it gone through its break in tune up yet?Did you do the re jeting? My guess is it was re jeted wrong & neeeds to be re jeted again or could also need more air(upgraded air kit) or a tfi or power comand fuel mod.My bike also poped untill I did the air & fuel upgrades & them upgrades will also give you a much needed house power needed for this rig.


Bring it to a shop & have it looked at.......


Good luck

Posted on Apr 26, 2009

Ad

Anonymous

  • 207 Answers

SOURCE: i have a yamaha 650 vstar, it will only stay

it sounds to me like clogged jets in the carb u need to take them off and clean the jets with a peice of small wire pull a peice off a wire wheel it works best for the polit jets (small ones ) get a digital camera and take pictures as u go if you are not sure that way u can refer to them if you get lost good luck

Posted on Jun 27, 2009

Ad

Anonymous

  • 301 Answers

SOURCE: 2002 yamaha 650 vstar, 20,000 miles. it won't

Could be the coil. Also could be several other things. Download a shop manual and diagnose it.

Posted on Oct 17, 2009

Anonymous

  • 79 Answers

SOURCE: I'm trying to change the speedometer light on my Yamaha VStar

Perusal of a parts manual shows the bulbs to be in sockets with wires hooked to them which press into the outer back of the speedometer head, remove the offending socket (the one on the top, the other 4 are the function lamps I previously mentioned) by gently pulling it outward, the bulb will slide out for replacement.
Have fun and good luck.

Posted on Dec 21, 2009

daltonp

Paul Dalton

  • 361 Answers

SOURCE: 1999 yamaha dragstar paint

Go to a local FinishMaster store and they will use a color eye to find u a color

Posted on Apr 14, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the airbag code 34 for a 2005 Lincoln Town Car Signature Limited?


Pinpoint Test H: LFC 33 and 34/DTC B2292 - Restraint System - Safety Belt Pretensioner Status
Normal Operation
The restraints control module (RCM) checks all of the safety belt pretensioners for faults. If the RCM detects one of the following faults on any of the safety belt pretensioner circuits, it will store diagnostic trouble code (DTC) B2292 in memory and flash either lamp fault code (LFC) 33 or 34 depending on the fault (or higher priority code if one exists) on the air bag indicator.
Fault Conditions
The RCM monitors for the following fault conditions:
  • Low resistance.
  • Circuit open.
  • Circuit short to battery.
  • Circuit short to ground.
Possible Causes
A safety belt pretensioner status fault can be caused by:
  • Wiring, terminals, or connectors.
  • A faulty pretensioner.
  • RCM.
PINPOINT TEST H: LFC 33 AND 34/DTC B2292 - RESTRAINT SYSTEM - SAFETY BELT PRETENSIONER STATUS NOTE: Most faults are due to connector and/or wiring concerns. Carry out a thorough Inspection and Verification before proceeding with the Pinpoint Test.

Apr 07, 2018 | Lincoln Town Car Cars & Trucks

1 Answer

What is Code 33 on Onan Generator Model12.5 HDKCB11506B?


You may be reading the code wrong, Code 33 shows up as blink 3 pause blink 3. This means it has a lower level code fault. To access the real code. Press the stop button 3 times fast within 5 seconds and re-post what the code is please. It may blink pause then blink again, that is the lower fault code that will help diagnose the problem.

Feb 10, 2015 | Onan Generator, 4000W, Gasoline

2 Answers

MY YBR ENGINE MANAGEMENT LIGHT FLASHES 3 SHORT FOLLOWED BY 3 FAST


That indicates fault code 33 which is a faulty ignition coil

Fault code 12 - Crankshaft position sensor

Fault code 13 - Intake air pressure sensor

Fault code 14 - Intake air pressure sensor

Fault code 15 - Throttle position sensor

Fault code 16 - TPS

Fault code 19 - No signal from ignition to ecu

Fault code 22 - Intake air temp sensor

Fault code 28 - Engine temp sensor

Fault code 30 - Tip over sensor

Fault code 33 - Igniton coil

Fault code 39 - Fuel injector

Fault code 41 - Tip over sensor

Fault code 44 - Read write error ECU

Fault code 46 - Power supply error to FI system

Fault code 50 - Ecu malfunction

Jan 08, 2015 | 2009 Yamaha yBR125

1 Answer

How do I fix code 33 on my jeep yj


i expect the ecu is reading A fault and as the fault list is for all jeeps no matter what the spec they've used 33 even without A/C , so will be hard to trace , so start with a good service , and maybe coil pack and take it from there , jeep forums might be the place for more speciliast advice

Jun 08, 2014 | Jeep Wrangler Cars & Trucks

1 Answer

F50 fault on maytag MTW6500TQ washer after apprximately 1 minute of startiong cycle


Two things cause the dreaded F50 code. (motor)

1. The machine control
Bravos MTW6600T

http://www.repairclinic.com/SSPartDetail.aspx?s=t-Maytag+MTW6600T+-%3d%3di1469076&PartID=1469076

2. The stator

Item 17 this link:

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5136402&diagram_id=1303991#d1303991

The upper cover of the stator comes in kit form and has been known to also cause the dreaded F50 code.

http://www.appliancepartspros.com/part_details.aspx?part_id=4327312&rdr=%2fpartsearch%2fmodel.aspx%3fmodel_id%3d5136402%26diagram_id%3d1303991


All of them are some what costly repair(s) in my book but cheaper than a new machine.

I have yet to change a Stator for an F50 Code.... but have changed a lot of machine controls (most often failure) and stator cover kits (occasional failure) that corrected the problem.

Just being honest. Thanks for using FixYa!

Kelly

Oct 13, 2009 | Maytag MTW6500TQ

1 Answer

Need explantion for harley davidson DTC fault codes


B0563 is high voltage; check regulator and stator output first; inspect regulator ground; actual fault is more than 16v to battery=big boom under your ****=bad; probably bad reg ground or regulator; but need to check stator while you are there! good luck...T

Apr 12, 2009 | 2004 Harley Davidson XL 883 Sportster

1 Answer

Washer starts, then shows fault code


Two things cause the dreaded F50 code. (motor)

1. The machine control
Bravos MTW6600T

http://www.repairclinic.com/SSPartDetail.aspx?s=t-Maytag+MTW6600T+-%3d%3di1469076&PartID=1469076

2. The stator

Item 17 this link:

http://www.appliancepartspros.com/partsearch/model.aspx?model_id=5136402&diagram_id=1303991#d1303991

The upper cover of the stator comes in kit form and has been known to also cause the dreaded F50 code.

http://www.appliancepartspros.com/part_details.aspx?part_id=4327312&rdr=%2fpartsearch%2fmodel.aspx%3fmodel_id%3d5136402%26diagram_id%3d1303991


All of them are some what costly repair(s) in my book but cheaper than a new machine.

I have yet to change a Stator for an F50 Code.... but have changed a lot of machine controls (most often failure) and stator cover kits (occasional failure) that corrected the problem.

Just being honest. Thanks for using FixYa!

Feb 21, 2009 | Maytag MTW6500TQ

2 Answers

LE fault code for LG WD-1019bd washer


I found that in winter time not a problem with my LG front loader, but when the temperature went over 30 Celsius the problem came back and intermittent like yours did, there was also an unusual noise coming from the machine.
What I did to fix the problem was to remove the stator and place it in the freezer for about half an hour or so, I also cleaned any minor dust and grit from both the Stator magnets and the Stator drum, replaced it still very cold and now it works well with no more unusual noise and the outside temperature has no more bearing on the machine not spinning this day!
I hope this helps!
Regard
Andre’

Jan 07, 2009 | Washing Machines

Not finding what you are looking for?
2000 Yamaha XVS 650 Dragstar Classic Logo

Related Topics:

157 views

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1189 Answers

gbob59

Level 3 Expert

3063 Answers

randymanfive

Level 3 Expert

501 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...