Replace bulb on speedometer

Google

make model replace bulb

It is impossible for us to guess what you have.

https://www.google.com/search?q=change+light+bulb+in+pressure+oven

..

Cannot find your model number, please provide make and model.

u have got to take the hole head light off to take the cover of speedo

Hi, To acess the light. Remove the plastic cover over light carefully. Replace bulb and your good to go.

You should be able to just pop it out using a small flat head screwdriver. Once out, take the bulb to your local auto parts store and replace it.

Maybe burnt out bulbs,,,

ck here for replacement....

https://www.youtube.com/watch?v=ChM3Oz-naDY

go to your local Chrysler dealer a buy the proper bulbs, they come complete and proper wattage, and they are cheap in price. word of caution replace all the illumination bulbs, when one is black the rest will follow. GOOD LUCK RDJRP

you can check if is the fuses if that check out good try to check the light bulb do the speedometer work

take out screwws on light remove bad lightbulb then replace lightbulb

You need to remove th whole inst. cluster to replace the bulbs that are located on the BACK side in bulb carriers. Usually turning a 1/4 turn to the left reomves the carries in order to replace the bulbs. Some manufactuers, you have to replace the bulb carrier/socket and bulb as a unit , others just pull the bulb and replace with the SAME type bulb as removed. Most instrument carriers will have on the back what the particular bulb in a specific position is used for by a symbal and the wattage for the also ie: 2.5, which is 2.5 watts. In remove ing the cluster be very careful removeing the connectors from the back. There are certain ways each has to be released to come off but usally can only go in a certain location in the cluster, just make a mental note to yourself has you disconnect them and you will be fine. Alan