The plastic connector that connects the wires to my guage cluster has been removed so i need to identify each of the 17 wires co i can connect my cluster!
SOURCE: 2002 kawasaki ninja 250 motor on ATV need wiring help
Hi and welcome to FixYa,
To my knowledge, there would only be 3 wires needed from the handlebars that affects the engine:
The first 2 would go to the interlock plus the neutral wire and the sidestand wire. The interlock then sends signals that starter motor can turn and that CDI can fire.
As to the ignition coil, 1 wire is IGN B+12 while the other would go to the CDI and should pulsate when cranking or engine running.
Good luck and thank you for using FixYa.
SOURCE: Wires are disconnected on my Kawasaki GPZ 500, I
Wires are color coded > red to red, blue to blue, etc.. As to where to connect each wire, just go to the dealer and ask to see a wireing diagram. Unless he is a **** he will be glad to help. Other options include the library for a service manual, purchase a service manual, Google 'Kawasaki GPZ 500 wireing', and finding another GPZ500 and looking at it's wireing.
SOURCE: do not know where to connect hour meter wire to the spark plug
One wire is the flexible silicone rubber wire from the spark plug to the ignition coil. You don't have to strip or connect the other wire, just wrap it around the spark plug wire a few turns.The current from the spark ignition will induce a signal into the hour meter that the meter uses to determine when the motor is on or off. I hope this helps and good luck.
SOURCE: wiring diagram 2001 zx6r
Try this manual, it should cover all your needs. Are you sure you have the correct rating fuse in the box, the manual will solve the problem any way. Good luck:
http://vitek.vellum.cz/manualy/Kawasaki%20Ninja%20ZX-6R%2000-02%20Service%20manual.pdf
367 views
Usually answered in minutes!
×