I've never worked on your type of bike but the way it's done on Harleys is to unplug the wires coming from the stator that plug into the regulator. Then start the bike and check the voltage coming from the stator by using a Volt Meter (AC VOLTS) on the plug at the end of the wires coming from the stator.
*You have to be Sure the voltmeter is set to AC Volts when checking the stator.*
We look for 30 to 40 volts AC if the stator is good. Of course your bike will be a little different but you might be able to do the same.
3,380 views
Usually answered in minutes!
×