Question about KTM Motorcycles

Open Question

Oil change KTM 440 MXC

Changing the oil on ktm 440 mxc @

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 8 Answers

SOURCE: starting after servicing

dirty air filter? anything clogging the inside of the air boot?and since u drained AND bled the radiator fluid, did u fill it back up to the top with specific dirt bike radiator fluid?pilot and or needle and main jets clogged and clean your carb. if your pilot jet is clogged you;d be kickin the bike all day. these small things will prevent your bike from starting so check them

Posted on Feb 04, 2009

Ad

lightspirit

  • 302 Answers

SOURCE: i have a 1998 ktm mxc 250 idles rough

Whew! OK, here are some things to check.
some items will require timing info. If you do not have a service manual, seriously consider one. Clymer books probly has one fer your ride, and the dealer may be able to order their own for you. In the meantime, go to your library. Go to reference section, look up the 646 area for auto/motorcycle books.
Check/clean:
Air filter, fuel filter, float bowl on Carb. jets in carb.
Spark plug
Idle stop screw. turn the throttle. release throttle, and watch where the moving part near the carb stops.
Reset timing
Check air path from air inlet to exhaust esp intake side

Posted on Oct 19, 2009

Ad
voodoomox

marlon john madrid

  • 1689 Answers

SOURCE: how much for a piston kit and cylinder hone on a

just bought a wiseco 305 with rings for 168 USD ebay

Posted on Apr 13, 2010

baxtom

maurice44o4

  • 74 Answers

SOURCE: how do i remove the ststor from my ktm mxc 300

Disconect the stator wiring coming from the engine cover, drain oild if its a wet coil, remove engine cover, remove fly wheel (will need a puller or flywheel removal tool witch threads into the fly wheel inner thread and pops it off when you screw the bolt down the inner thread of the puller) remove the stator bolts and thats you.

Posted on Jan 27, 2012

Phanter Musang

  • 48 Answers

SOURCE: i need to know how to check the oil in a 96 ktm 550 mxc?

Do you have the owners manual with you? If yes, then you can check your manual and look for the page where you can check the location of the oil.

-
IRC Motorcycle Tires combined with good quality components

Posted on Mar 20, 2013

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

'02 KTM 520 MXC. Plug wet with oil. Is there a valve problem?


run a compression check to see if it is low. If low squirt some oil in cylinder and rerun. If it stays low possible valve guide problem. If oil fixes compression then the rings are bad.

Sep 08, 2015 | KTM Motorcycles

1 Answer

I have a 2000 ktm 300 mxc 2stroke. previous owner put sx plastics on it. i have mxc plastics with headlight and tail light both with connectors. if i plug em in is it ready to go or do i need to put a...


if its the gearoil level bolt then its stripped threads and needs sorting asap coz if it falls out while riding then oil will come out and seize the engine ! switch for the lights should be on the bars or sometimes on the key if fitted , trace wires and see! P...

Dec 14, 2013 | 2000 KTM MXC 300

1 Answer

I need to know how to check the oil in a 96 ktm 550 mxc?


Do you have the owners manual with you? If yes, then you can check your manual and look for the page where you can check the location of the oil.

-
IRC Motorcycle Tires combined with good quality components

Mar 20, 2013 | KTM Motorcycles

1 Answer

How much oil does a ktm 450 exc hold


Thank you for contacting FixYa with your inquiry.
The suggested amount is 1.2 L.

You can download the owners/service manual from this site. http://www.ktm.com/450-EXC.72.0.html?&detailview=4&cHash=dcbf8829e1
Just a note:
I have the same bike and 1.2l of oil will NOT register in the sight glass. I can't even see it in the bottom of the glass. SO IGNORE THE GLASS IF THIS HAPPENS AND DO NOT KEEP ADDING OIL TILL YOU SEE IT IN THE SIGHTGLASS. Add 1.2 liter if you are changing the filters, and add 1L if you are keeping the old filters in there.
Let us know if we can be of further service.
Kind regards,
TF

Jul 17, 2011 | 2003 KTM MXC 450

1 Answer

How much for a piston kit and cylinder hone on a 1996 ktm 300 mxc


just bought a wiseco 305 with rings for 168 USD ebay

Apr 12, 2010 | 2001 KTM MXC 300

1 Answer

KTM MXC 400 dies and don't know what kind of oil to use


Sounds like a fuel problem. Try replacing the fuel filter.
Check all the lines and the tank vent.

Jun 11, 2009 | 2002 KTM MXC 400 Racing

1 Answer

Common Problems on a 01 KTM 520


Dont open the throttle fully you will die...
If it stays on the track with now falls, NO problems , It's a KTM

Mar 10, 2009 | 2001 KTM MXC 520 Racing

1 Answer

Starting after servicing


dirty air filter? anything clogging the inside of the air boot?and since u drained AND bled the radiator fluid, did u fill it back up to the top with specific dirt bike radiator fluid?pilot and or needle and main jets clogged and clean your carb. if your pilot jet is clogged you;d be kickin the bike all day. these small things will prevent your bike from starting so check them

Jan 27, 2009 | 2003 KTM MXC 525 Racing

1 Answer

Gaging


Are the exhaust fumes thick? if so your flooding out but chances are the accelerator pump can't keep up with fuel.,

Nov 10, 2008 | 2003 KTM MXC 525 Racing

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top KTM Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6571 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...