Where can i get a clear screen for my r1150gs

If you go to your local dealer parts department and ask them for a price quote they usually don't mind giving you one. The printouts usually have a parts number printed for the dealer part. Use that dealer number to reference any other more economical choices you can find to make sure you are buying one that is compatible.

The kill switch on a BMW R1150GS motorcycle is designed to immediately shut off the engine in case of an emergency or accident. If you need to replace the kill switch on your R1150GS, you can follow these general steps:

1. Disconnect the battery to avoid any electrical hazards.
2. Remove the handlebar grip on the side where the kill switch is located. You can do this by loosening the screws that hold it in place and gently pulling it off.
3. Locate the kill switch module on the handlebar and disconnect the wiring harness from the switch. Depending on the year and model of your R1150GS, you may need to remove the switch from the module by using a screwdriver or Allen wrench to remove any screws or bolts that hold it in place.
4. Install the new kill switch by reversing the steps used to remove the old one. Connect the wiring harness to the switch and secure the switch to the handlebar or switch module using screws or bolts.
5. Test the new kill switch to make sure it works properly by reconnecting the battery and starting the engine.

It is important to note that these steps may vary depending on the specific year and model of your R1150GS. If you are unsure about how to replace the kill switch or are not comfortable doing so yourself, it is recommended that you take your motorcycle to a professional mechanic or BMW dealership for assistance.