Removing harley davidson ultra classic gas tank

Duplicate question already answered

Should be a screw or two on the inside of the rear fender that you should be able to get with a right angle screw driver.

Gas filter on fuel injected models is in the fuel tank attached to the fuel pump. Requires removiing fuel pump from tank to do so.

Disconnect battery , remove the outer primary case, pull back the lock tab on the starter jackshaft, unbolt the retainer screw, then remove the two starter bolts from the right side, sometimes you need to loosen the oil tank mounts to get at these, slip the starter and coupler out as a unit, replace the coupler and jackshaft the same way they came out when the new starter goes in, install bolts , retighten the jackshaft bolt and bend over the retainer, install and fill primary case, connect battery thats it buddy

in pic below buddy if not get back to me