Question about KTM Motorcycles

Open Question

VALVE CLEARANCE 2013 KTM 450 SXF

VALVE CLEARANCE SPEC @

Posted by Anonymous on

Ad

5 Related Answers

Anonymous

  • 4 Answers

SOURCE: 2007 ktm 450 sxf timing

i could tell ya easly or u could just go to dirtrider or transworldmx websites and they'll give u detailed pics so itl be easy

Posted on Feb 17, 2009

Ad

Anonymous

  • 3 Answers

SOURCE: ktm 450sxf bike wont start, back wheel wont turn

Hi, I just had same prob with a mates 07 450sx and it happened when riding it, when i pulled it down i noticed the timing was out. It was a little low on oil and i think what happened was hydrolic cam chain adjuster let go and it spun a couple teeth on exhaust cam. i redone timing and it turned ova fine so i pulled head off and checked valves and they were fine some how and now its goin great. hope this helps and hope your lucky enough not to bend valves. the bike shop told him $2000 at least before even lookin at it.

Posted on Jun 15, 2009

Ad
ollie reece

ollie reece-jones

  • 1167 Answers

SOURCE: ktm sxf 450 08, misfire at 3/4 revs and above,

ok buddy on carb will be a screw try fiddle with this mixture screw on carb below get back to me with results 797ccb7.jpg

Posted on Oct 11, 2009

tabbycat282

tabbycat282

  • 56 Answers

SOURCE: i have a 2007 KTM 450sxf after i ride it it dies within a minute

I'd start with simple things like checking the plug and doing a few electrical tests.Some tests you may be able to do yourself like resistance checks.Compare the following spec with what you get ; Primary coil . 25~35 0hms Secondary 5050~7550 Valve clearance inlet 0.10~0.15 exuast 0.15~0.20 both cold and in mm.

Posted on Nov 27, 2009

heeman mohun

  • 1341 Answers

SOURCE: set on 08 ktm 450 sxf Cam timing

It could be a faulty coil inside the magneto, wrong timing or a problem ranging from cdi unit, wiring from the former up to the spark plug.Sometimes the cap that sits on the spark plug could cause this.Basically you are having a firing problem, which means combustion chamber is not getting the right spark for proper combustion.Sometimes even an improper ground from chassis to engine could be the cause of this problem.Hope this helps.Any questions then please ask..O I forgot, try a different spark plug,sometimes these could cause this problem.

Posted on Feb 13, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 KTM 250 SXF valve clearance


.010" inlet hot .012" exhaust hot if water cooled
if air cooled add .002" to the measurements

Nov 01, 2017 | 2011 KTM 250 SXF

2 Answers

Valve clearences int and ex ,2008 450 sx


Thank you for contacting FixYa with your inquiry.
According to the KTM service manual the cold valve clearances for this model are as follows:
Valve Clearance Cold intake - 0.07....0.13mm (0.0028...0.0051 in) Valve Clearance Cold exhaust - 0.12--- 0.18mm (0.0047...0.0071 in)
If we can provide further information please advise.
Kind regards,
TF

Jul 15, 2011 | 2008 KTM 450 SX-F

1 Answer

2007 ktm 450 sxf timing


i could tell ya easly or u could just go to dirtrider or transworldmx websites and they'll give u detailed pics so itl be easy

Feb 07, 2009 | 2008 KTM 450 SX-F

Not finding what you are looking for?
Motorcycles Logo

Related Topics:

484 people viewed this question

Ask a Question

Usually answered in minutes!

Top KTM Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6571 Answers

Are you a KTM Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...