Two banging sounds with each rotation

My 2006 Dodge Ram 1500 makes a clunking noise when acceleration from a stop. and also while driving sometimes in low RPM.

sounds like timing chain or belt

the make , model and year are missing but if it is a top loader unit , it indicates that the tub suspension bar motion absorbers have broken and need replacing

well without hearing it, i would think its a cv-shaft that has too much play banging around there...at the same time, it also sounds like it could something internal in the trans spinning too far before engaging....mounts usually makes noise under load..just after you put it in gear, and step on the accelerator pedal, you will then hear a clunk..not as soon as you put it in gear, unless extremely bad.

may be just a broke belt

It sound like there is change or hard object in the inner dryer tumbler fins Not sure what model or make the dryer is need more info please.Maytag inglis??????

I believe this is a brand new dishwasher. Please listen carefully to determine of the sound you hear (clunk) is being made inside the dishwasher or is it being made near by. Most times, the problem is that the hot water pipe is baking the noise when the dishwasher closes the water inlet valve ... and the pipe goes "clunk"
I have not had an LG dishwasher make a clunking sound inside itself when the cycle changes. Also, because this dishwasher is so very quiet (well insulated) the pipe banging would be louder than something inside the Dishwasher.
If you have access to the hot water pipe, listen very near it when the cycle changes for the sound. Follow that pipe (hot water) pipe back and insulate it at the point it is banging. (or get a plumber to evaluate and resolve.)
Please get back to me with what you find, OK?
Good Luck!

Hello calmtouch,

You said,
When in spinning cycle, the barrel begins to move all over banging the washer across the floor. I don't even know what to look for.
Help.

sounds like the coupling connecting the tub to the transmission may be loose and throwing the wash tub out of rotation causing the banging and walking washer.
Bless You
Huuum

you may have a dampening shock that is bad