- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
IS THERE POWER TO THE FULE PUMP DID YOU CHECK THE FULE PUMP RELAY YOU CAN CLICK OFF AND ON WHEN TURN THE KEY OFF AN ON ITS UNDER THE HOOD DO YOU HEAR IT CYCLE WHEN TURN THE KEY TO ON POSITION HAVE SOME ONE TAKE THE GAS CAP OFF AND LISTEN FOR THE FULE PUMP TO RUN FOR FIVE SECONDS IF THEY HEAR IT THEN PUMP IS RUNNING AND OK WHEN YOU TURN THE KEY BACK OFF WAIT 10 SECONDS FOR IT TO RESET AND IT WILL CYCLE AGAIN WHEN YOU TURN THE KEY ON .. IF THAT IS OK CHECK FOR SPARK AT A PLUG IF YOU HAVE SPARK AT THE PLUG THEN ONE SHOT EITHER IN THROTLE BODY AND TRY TO START IF IT FIRES THEN WE CAN TAKE FROM THERE LET ME KNOW HOW YOU DO HERE POHLCAT
YOUR LUCKY IT RUNS AT ALL THAT IS LOW PRESURE LOOKS LIKE FULE PUMP TIME FULE PRESURE NEEDS TO CLOSER TO 60 LBS PLUS THATS WHY IT IS BOGGING OUT YOU CAN TRY CHANGING THE FUEL FILTER BUT IT LOOKS LIKE TIME FOR ANEW FULE PUMP HOW OLD IS THE PUMP AND WHAT IS THE MILAGE ON THE TAHOE 150K PLUS RIGHT OR MORE
Hello baas60: My name is Roger andI will help you. The fuel pump on the 1996 Ford Taurus is located in the fuel tank. THe best way to access the pump is from underneath the car. You will need to drop the fuel tank in order to gain access to the pump. this is best done on a hoist. Should you need further help please just ask. Please rate the answer you received. This way I know it was helpful. Thank You for using Fix Ya. Roger
have a look at the fule pipes from the fule tank if there slightly blocked the pump wont pull any fule through them pull the pipes off and blow them all out with comprest air (not the pump) you may have looked at the pump and it may look fine but the fule pump may still need an overhall to get it in full working order