Question about 1993 Honda VT 600 C Shadow

1 Answer

Install saddle bags

How do I remove the rear seat to install new saddlebags

Posted by Ron Shurer on

Ad

1 Answer

Strech

Strech

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points
    Superstar:

    An expert that got 20 achievements.
    All-Star:

    An expert that got 10 achievements.
    MVP:

    An expert that got 5 achievements.

  • Honda Master
  • 1,562 Answers

Http://www.bikebandit.com/houseofmotorcycles/1993-honda-shadow-vlx-600-vt600c-seat/o/m151542sch24319

It looks like there is a bolt (#4) on each side that needs to be removed.

Posted on Dec 02, 2013

Ad

2 Related Answers

A Miller

  • 8404 Answers

SOURCE: 2006 VT 750 Shadow: saddle bag installation for 2009 750 shadow...

Install the brackets and lace the bags to your liking.

Posted on May 13, 2010

Ad

Anonymous

  • 2 Answers

SOURCE: Lacing Saddlebags

Yes you will need brackets. You can find them at your Honda dealership. They mount to your fender where the two fender bracket bolts are located. You take the two bolts out, line the saddlebag brackets up with the holes, then replace the bolts. It should take about 5 mins.

Posted on Mar 09, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I install Saddlebags on a 2005 Mean Streak?
various ways mate you can get throwovers which litterally throw over the rear fender under the seat(over the seat if prefered.) you will need brackets which are bike specific to stop them going into the rear wheel. you can get quick release brackets so you can remove panniers at your destination. go to cruiser customizing and they have all the info and accessories you need.

Aug 04, 2011 | 2005 kawasaki Vulcan 1600 Mean Streak

1 Answer

I cant remove the seat on my 87 gv1400
Remove the saddlebag lids, undo the 2 bolts just behind the shocks, one on each side of the seat. These are the only bolts that hold the seat on. Lift the rear of the seat about 6 inches to release the front tangs. Raise the front to the vertical and remove the 2 air lines from the front right side of the base and the one at the rear. Seat should now be clear of things attaching it to the bike. Join the worldwide Yahoo email group for these bikes via www.suzukicavalcade.com and ask some more questions.

Oct 03, 2010 | 1986 Suzuki GV 1400 Cavalcade LXE

1 Answer

How does the seat be removed to access air lines for the shocks
Two bolts, one either side of the lower rear of the seat, you have to remove both lids from the saddlebags (panniers) to gain access to them. Once undone, lift the rear and pull the front of the seat backwards. There is two plastic "pins" that secure the front of the seat in position. With the Gt, you don't have to worry about the airlines to the seat, on the LX there is one airline to the rear of the seat and on the LXE there is the one at the rear and two at the right front side.

Jun 04, 2010 | 1986 Suzuki GV 1400 Cavalcade GT

1 Answer

Remove rear seat ti install saddle bags
Normally one bolt in the back and the pillion slides into the driver seat. Pulling back on the pillion after removal of the hold down bolt usually releases it

May 19, 2010 | 2003 Yamaha V Star Classic

1 Answer

How do you remove the seat of a suzuki vs 800 to fit a saddlebag? Please
Insert your ignition key into lock and turn counterclockwise, raise the rear-end slide seat backward. That should do it.

Apr 16, 2010 | 2004 Suzuki VS 800 Intruder

1 Answer

Got saddle bags and rigid supports for my 95 intruder and have removed seats, but have no idea how to attach brackets/bag. any help, I'm lost, thanks
if there are bolts holding the rear fender to the frame at the side of the seat (2 on each side), remove these 4 bolts and offer up the saddlebag brackets. the bolts then go through the ends of the brackets and then back into the frame of the bike and then on in to support the rear fender.
It might be an idea to purchase longer bolts as they may not be long enough with the added depth of the saddlebag bracket.
make sure they are tightened up as the bolts also hold the rear fender to the frame of the bike and if the rear fender is allowed to move it will crack the plastic.
hope this helps

Nov 06, 2009 | Suzuki VS 800 Intruder Motorcycles

1 Answer

Install saddle bags
A bolt is underneth the driver seat at rear. Hard to see. Maybe pull off driver seat first the rear seat - be sure you are using a soft saddlebag
support. Don't get bags caught in wheel

Oct 07, 2009 | 1992 Suzuki LS 650 Savage

1 Answer

Removing the seat on a 2004 suzuki intruder 800 to install saddlebags
Bend the rear sent in the middle while pushing it forward, the back tabs will come loose so you can lift the seat up.

Sep 11, 2009 | 2004 Suzuki VS 800 Intruder

1 Answer

How do i install saddlebags on a 2007 honda shadow vlx vt600?
I've got a 2007 Shadow and recently put on a set of saddlebags. What you do is use a large allen wrench or star wrench on the seat strap to take out those two bolts, and then you slide the seat towards the back of the bike (or perhaps you need to slide it to the front, I forget, its just the "picture-hanging" connection, <=0 is the shape of the hole on the seat, and on the bike beneath it is a peg, with the seat hole large enough to slide the peg through, but once you shift the seat to its natural position the head of the peg is at a place too narrow to come off, hence the sliding motion to remove it) . Then it is smooth sailing, just lay your saddlebags over the peg with the seat removed, and try and put the seat back without disrupting the bags too much, which can be hard since its a pretty snug fit. Hopefully that helped, I don't know if the request was talking about post market support frames or something

Aug 04, 2009 | 2005 Honda VT 600 C Shadow

1 Answer

Changing rear fender on 2003 fatboy
Here's my 2 cents... you need to remove the seat, saddlebags, disconnect battery, dsconnect the wiring harness, remove the signal lamps and the hardware securing the fender. There are torque values u need to know when installing the new one. This is all in the service manual for your model. I would go to the dealer and get one, you want all the specs correct and thats the only way to get em

Nov 26, 2008 | 2003 Harley Davidson FLSTF Fat boy

Not finding what you are looking for?

View Most Popular

1993 VT 600 C Shadow

  • Motorcycles

Related Question

How do I install Saddlebags on a 2005 Mean Streak?

  • 2005 kawasaki Vulcan 1600 Mean Streak

Open Questions:

0 Answers

1993 Honda Shadow 600 stalls when I put it in gear. I don't have a kickstand switch. I put a new nut sensor in, new fuel pump, relay and cleaned the carb. This just happens out of nowhere too. So I would like to know what's going on thanks.

Jan 09, 2017 | 1993 Honda VT 600 C Shadow

0 Answers

can I put a 93 honda shadow vt750 fuel pump on my 93 honda shadow vt600

May 10, 2014 | 1993 Honda VT 600 C Shadow

0 Answers

1993 honda shadow vt 600 wiring diagram

May 02, 2014 | 1993 Honda VT 600 C Shadow

0 Answers

I am wondering if the triple tree from a VT 600 C will fit a VT 700 C? I am rebuilding a 1985 Honda Shadow VT 700 C and I want to change the triple tree and I wonder if one from a VT 600 C will fit?

Dec 28, 2013 | 1993 Honda VT 600 C Shadow

See all 1993 Honda VT 600 C Shadow Questions

Related Topics

1993 Honda VT 600 C Shadow Logo

Related Topics:

8,320 people viewed this question

Ask a Question

Usually answered in minutes!

Popular Questions

1994 Honda VT 600 C Shadow

1993 Honda VT 600 C Shadow

1992 Honda VT 600 C Shadow

1993 Honda VT 600 C Shadow

2003 Honda VT 600 C Shadow

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6576 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Gino Cussen
Gino Cussen

Level 2 Expert

217 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Manual. user-manual-1993 VT 600 C...

1993 VT 600 C Shadow

Loading...