Question about 2006 Yamaha Ybr 125
Posted by Anonymous on
SOURCE: yamaha ybr 125 top speed
Not much to start with here unfortunatly mate. A free flow muffler will help top end speed, change the factory airbox to a K&N style pod air filter, other than that, hugging the tank at top speed :) If you do change these parts, you may also need to increase the main jet size to richen up the mixture for better tuning of the motor with the better flowing parts. This bike has a top speed of 100kmp and produces 10 hp, so you may only expect to get at best less than 1 extra neddy, and perhaps another 5 km/hr.... I suggest upgrading to a bigger machine of you feel the need for speed :)
If its 125's you are into, test drive a Honda CBR 125R 6 speed fuel injected 13.4 horsepower, and good for 120km/hr
Posted on Jul 10, 2009
SOURCE: Front sprocket
Hi ........... One tooth less will give you more top speed (if you can pull top revs) but will reduce accelleration. If you go for one tooth less you'll need to tighten the chain and/or remove a link. It's a trade off ............ decide what you want the bike to do.
Posted on Dec 24, 2008
Take the wheel off and remove the brake hub. Now clean out all the dirt and mud from riding in the creek and through mud puddles. The brake shaft has dried mud on it and can not rotate freely in the hub. You will probably need a plastic hammer to punch it out of the casing. clean the shaft and the casing hole the shaft goes through. Grease the shaft with waterproof grease.
Please rate this solution. Thanks!
Posted on Mar 29, 2009
I suggest to check wether the carburator has a restriction in the holder
check if the clapets (between carb and cilincer) has a restriction
check if the exhaust has a restriction.
But overall: a race-exhaust, a tecnician who personalizes the carb to the local wether conditions by adjusting the jet, an eventually needed unrestriced cdi will improve bigtime.
greetings from a big 2s fan.
Posted on Oct 22, 2009
Tips for a great answer:
May 18, 2011 | Suzuki SportCity One 125 4t Motorcycles
839 people viewed this question
Usually answered in minutes!