Question about 2005 Suzuki GSF 1200 Bandit S
Brake fluid leak @
If no fluid loss,then i would squeeze the fluid line (rubber part) to the slave cylinder. If you now have pressure in the pedal replace the slave cylinder. If still no pressure then change the clutch master cylinder.
Posted on Jul 02, 2009
I am not familiar with your set up but what you describe is very common.The bad news is you have probably bent your clutch push rod and have broken your crankcase. Which means complete disassembly of the motor and weld the case or replace the case. Perhaps an ebay or salvage motor with a good case? Good luck you have your work cut out for you.
Posted on Mar 21, 2010
I'm having a similar issue with my 2003 Marauder. I now believe it's
coming from the fork suspension. The red fluid is inconsistent with the
color of brake fluid. The brake fluid in my bike is tan in color where
as the leaking fluid is red in color.
I also do not believe it is any other fluid since the leak is only at the front wheel. Thus, it can not be transmission fluid, oil, radiator coolant or anything else. I'll reply to this posting when I completely resolve the issue
Posted on Sep 13, 2010
SOURCE: i need to change the
there is a plug not a dip stick. drive the car on ramps,block the wheels and lets begin.slid under look for the passenger drive axle were it goes into the trans.right below the axle is the fill plug.it is a 5/16 square hole,u can buy the tool # DW260 -070.or do what i did and make my own,take a 5/16 peace of key stock and a 6 inch long 3/8 drive extension a grinder and a file.us the key stock as a templet and machine the extension down to size and there u go ready to work
Posted on Oct 14, 2010
Tips for a great answer:
Aug 28, 2010 | 1999 Suzuki VZ 800 Marauder
Aug 11, 2010 | 2006 Suzuki Grand Vitara
Jan 25, 2010 | 2005 Suzuki GSX-R 600
Sep 11, 2009 | 2005 Suzuki Grand Vitara
Mar 26, 2009 | 2002 Suzuki XL-7
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: