Question about 2003 Kymco Venox 250

1 Answer

I did clean my 250 kemco carberators .It idels wel,ref wel but does not want to go slow.Can you please advise me.

Posted by pieter breedt on


1 Answer


  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.


    An expert who has answered 20 questions.

  • Expert
  • 60 Answers

If it idles and revs fine, then make sure there is no binding in the throttle cables. Turn your handlebars, right lock to left lock while twisting the throttle open to closed. Everything should operate smoothly.

Posted on Nov 01, 2013


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Breaks down middle to high revs

You should try cleaning the carberator. Start with The bowl and the main jet. 9 times out of 10 there is junk in it. Once cleaned properly it should run great. If not, be sure to check the float and the peckcock to make rue you're getting plenty of fuel to the carberator.

Apr 17, 2014 | 2001 Honda XR 250 R

1 Answer

The bike wont idle

Try cleaning the carb or air filter do you have a idel screw

Aug 15, 2012 | 2004 Yamaha YZ 250 F

1 Answer

Carb full of gas

sounds like the float is sticking inside the carberator might need new needle and seat as wel as a float check to see if float is gas logged

Jul 06, 2012 | Parks Optical 13.5hp Briggs And Stratton...

2 Answers

Suzuki dr 250 revving high

Did you checked the collar where the carburetor plugs on to on the cylinder head? They usually crack and **** extra air through. Also remove that rubber collar and check the o-ring it has installed at the point that contact's the cylinder head.

Feb 07, 2012 | Suzuki DR-Z 250 Motorcycles

1 Answer

2008 infinity ex35, auto. the veh. rpm drops and stalls when coming to a slow, stop sign etc. but it will start right back up every time. the problem is getting more frequent and there is no dtc. please...

fast idel motor inoperative and a conflict in the PCM soft ware which needs reprograming with updated data or too little fuel in the gas tank which slosh away from the pump , athrottle valve pin damage from improper cleaning method and it is not supposed to be cleaning by operating with ouer hand which may misled the PCM wher were the actual position in which it were told by the pre programmed memory data which is out of caliberated settings!

Jun 01, 2011 | Infiniti EX35 Cars & Trucks

1 Answer

2005 dodge dakota 4.7 4x4, service engine light is on steady, there's a miss when ideling or driving slow, when I accelerate the light blinks and the miss seems to vanish. Please advise

The miss does not vanish, the noice gets cammouflagged by the noice of the engine. Check service engine light first, Auto Zone or Advance will do it for free. Then post again with your engine code.

Sep 17, 2010 | Dodge Dakota Cars & Trucks

1 Answer

Suzuki rmx 250 1999 wont hold idel

Your air jetting is defective or maybe need to clean.It's not a big problem..Let me know if ok.

May 26, 2010 | 2004 Suzuki RM 250

1 Answer

It is carberator model and it coughs too much,especially when cold.Also the check engine light comes on (about half the time) causing more coughing.

Try cleaning your cards ,they may have a little dirt in the idel jets .as forv the engine light ,this may be a fault on the wiring side .Check to see if ther is no breaks or any wires touching the frame .

Mar 11, 2010 | 2001 Harley Davidson FXST Softail Standard

Not finding what you are looking for?
2003 Kymco Venox 250 Logo

Related Topics:

127 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kymco Experts


Level 3 Expert

85239 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6422 Answers

Are you a Kymco Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides