1989 Yamaha FZR 1000 Logo
A
Anonymous Posted on Oct 24, 2013

Fork oil change

I need to know how much oil to use per fork

5 Related Answers

kwd27

  • 6 Answers
  • Posted on Dec 30, 2008

SOURCE: front fork leaking oil from bottom of the seal.

This is one of the few things that I recommend you take to a shop - you need some very special tools and techniques to fix this problem. Sorry,
Kevin

Ad

Anonymous

  • 137 Answers
  • Posted on Mar 24, 2009

SOURCE: fzr1000 fork oil

hello m8,,i had one of these babys,,grab your self a medium grade oil,, if u have a litre bottle u need to put just over a quarter of that bottle in each fork,, or if u have a 500ml bottle pour half a bottle in each fork,, cheers

Anonymous

  • 2 Answers
  • Posted on Jun 02, 2009

SOURCE: fork oil capacity for yamaha 600 diversion

Hi,did my mates last week,used 350ml per leg.

Anonymous

  • 1 Answer
  • Posted on Oct 22, 2009

SOURCE: YZ 250 F 2007 Fork oil level

how do i check my oil level on my yz 250

Anonymous

  • 67 Answers
  • Posted on Feb 16, 2010

SOURCE: amount of oil in forks

The forks have to be bled correctly, then oil filled to the correct level by oil level (height) measurement. You need the service manual for your model if you are not familiar with the procedure. Since you asked the "amount" instead of "level" in millimeters - I assume you need the manual.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

Standard amount of fork oil for Honda xrm 125, what is best 2t or fork oil, my front fork is so bumpy

The fork oil does not have anything to do with the kind of engine do you have, 2t or 4t. Doesn't matter.
You need to replace the fork oil, you need to know the year of the fork. means, you need to know if it's a bladder or non bladder fork.
oil height of the bladder fork is approx. 70mm, non bladder forks run about 100mm oil level.
oil amount is about 530-600cc per leg
0helpful
1answer

Volume of fork oil needed per fork for a 1986 VF 400 nc 13

Well, when you take off the fork make sure you empty it first before anything else then make sure that the fork pressure spring is released before changing the seals. The fork oil amount should be no more than 200 cc or no less than 190 cc
0helpful
1answer

Dont know the amount of fork oil that is

Go to cycle gear and get the fork oil measurer. it will cost minimal and you can measure 1 fork. mark it then do your work, after that just fill to the level that you removed. recomend olins oil. costly but great. about $40 a bottle. 1 bottle will do both
1helpful
1answer

FORK OIL CAPACITY FOR 87 NINJA 1000R

ex500 models others will be similar it takes 352ml of oil
per fork. 15wt oil is what is manufacures speck for fork oil
3helpful
1answer

Need to know how much oil is in the forks of an aprilia sr50 please

front fork capacity is 285 cc per leg, but you need to take the spring out and fully extend the forks and measure 140mm from the top and thats where your oil needs to sit.
0helpful
1answer
3helpful
3answers

KX 125 (2003) motorcycle

its 120 mm or 4.7 inches from the top of the fork
Some measure the oil quantity and fill the fork up, some fill the fork up and measure the oil level. The most correct method is to measure the level, I guess, but many guys measure in quantity.. both ways work well.
1dcced6.jpg
Not finding what you are looking for?

122 views

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

vince

Level 3 Expert

2530 Answers

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1212 Answers

littlewheel

Level 2 Expert

122 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...